Подскажите как решить проблему с pavuk-0.9.34-r1

tr.c:254: замечание: expected ‘unsigned char *’ but argument is of type ‘char *’
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2 -march=native -pipe -Wall -DREVISION=\"2010-08-24T14:53\" -pthread -MT update_links.o -MD -MP -MF ".deps/update_links.Tpo" -c -o update_links.o update_links.c; \
then mv -f ".deps/update_links.Tpo" ".deps/update_links.Po"; else rm -f ".deps/update_links.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2 -march=native -pipe -Wall -DREVISION=\"2010-08-24T14:53\" -pthread -MT url.o -MD -MP -MF ".deps/url.Tpo" -c -o url.o url.c; \
then mv -f ".deps/url.Tpo" ".deps/url.Po"; else rm -f ".deps/url.Tpo"; exit 1; fi
tools.c: В функции ‘st_xvaprintf’:
tools.c:203: предупреждение: результат ‘fwrite’, декларированной с атрибутом warn_unused_result, игнорируется
In file included from /usr/include/fcntl.h:218,
from config.h:25,
from tools.c:8:
В функции ‘open’,
включённом из ‘tl_save_text_file’ в tools.c:1726:
/usr/include/bits/fcntl2.h:51: ошибка: call to ‘__open_missing_mode’ declared with attribute error: open with O_CREAT in second argument needs 3 arguments
make[2]: *** [tools.o] Ошибка 1
make[2]: *** Ожидание завершения заданий...
make[2]: Leaving directory `/var/tmp/portage/net-misc/pavuk-0.9.34-r1/work/pavuk-0.9.34/src'
make[1]: *** [all-recursive] Ошибка 1
make[1]: Leaving directory `/var/tmp/portage/net-misc/pavuk-0.9.34-r1/work/pavuk-0.9.34'
make: *** [all] Ошибка 2
* ERROR: net-misc/pavuk-0.9.34-r1 failed:
* (no error message)
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 2279: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of 'emerge --info =net-misc/pavuk-0.9.34-r1',
* the complete build log and the output of 'emerge -pqv =net-misc/pavuk-0.9.34-r1'.
* The complete build log is located at '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/temp/environment'.
* S: '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/work/pavuk-0.9.34'

>>> Failed to emerge net-misc/pavuk-0.9.34-r1, Log file:

>>> '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/temp/build.log'

* Messages for package sys-libs/timezone-data-2010j:

* You do not have TIMEZONE set in /etc/conf.d/clock.
* Skipping auto-update of /etc/localtime.

* Messages for package dev-libs/libsigc++-2.2.3:

* To allow parallel installation of sigc++-1.0, sigc++-1.2, and sigc++2.0
* the header files are now installed in a version specific
* subdirectory. Be sure to unmerge any libsigc++ versions
* < 1.0.4 that you may have previously installed.

* Messages for package dev-libs/nspr-4.8.4:

*
* Please make sure you run revdep-rebuild after upgrade.
* This is *extremely* important to ensure your system nspr works properly.
*

* Messages for package app-text/libpaper-1.1.23:

* run "paperconfig -p letter" as root to use letter-pagesizes
* or paperconf with normal user privileges.

* Messages for package app-portage/portage-utils-0.3.1:

* /etc/portage/postsync.d/q-reinitialize has been installed for convenience
* If you wish for it to be automatically run at the end of every --sync:
* # chmod +x /etc/portage/postsync.d/q-reinitialize
* Normally this should only take a few seconds to run but file systems
* such as ext3 can take a lot longer. To disable, simply do:
* # chmod -x /etc/portage/postsync.d/q-reinitialize

* Messages for package net-misc/dhcpcd-4.0.15:

* dhcpcd-3 command line support enabled
* You have installed dhcpcd with zeroconf support.
* This means that it will always obtain an IP address even if no
* DHCP server can be contacted, which will break any existing
* failover support you may have configured in your net configuration.
* This behaviour can be controlled with the -L flag.
* See the dhcpcd man page for more details.

* Messages for package media-plugins/live-2009.06.02:

* If you are upgrading from a version prior to live-2008.02.08
* Please make sure to rebuild applications built against live
* like vlc or mplayer. live may have had ABI changes and live
* support might be broken.

* Messages for package sys-process/cronbase-0.3.2-r1:

* Portage doesn't enforce proper permissions on already existing
* directories (bug 141619). Appropriate permissions are now being set
* on //etc/cron.{hourly,daily,weekly,monthly},
* //var/spool/cron/ and //var/spool/cron/lastrun/
* (see bug 182998)

* Messages for package sys-power/acpid-2.0.4-r2:

* You may wish to read the Gentoo Linux Power Management Guide,
* which can be found online at:
* http://www.gentoo.org/doc/en/power-management-guide.xml

* Messages for package app-forensics/chkrootkit-0.48-r1:

* Edit /etc/cron.weekly/chkrootkit to activate chkrootkit!
*
* Some applications, such as portsentry, will cause chkrootkit
* to produce false positives. Read the chkrootkit FAQ at
* http://www.chkrootkit.org/ for more information.

* Messages for package media-libs/libpng-1.4.3:

*
* Run /usr/sbin/libpng-1.4.x-update.sh to fix libtool archives (.la)
*
* Old versions of installed libraries were detected on your system.
* In order to avoid breaking packages that depend on these old libs,
* the libraries are not being removed. You need to run revdep-rebuild
* in order to remove these old dependencies. If you do not have this
* helper program, simply emerge the 'gentoolkit' package.
*
* # revdep-rebuild --library libpng12.so.0
*
* Once you've finished running revdep-rebuild, it should be safe to
* delete the old libraries. Here is a copy & paste for the lazy:
* # rm '/usr/lib/libpng12.so.0'

* Messages for package sys-apps/pciutils-3.1.4:

* Providing a backwards compatibility non-compressed pci.ids
* The 'pcimodules' program has been replaced by 'lspci -k'

* Messages for package media-libs/libv4l-0.6.1:

*
* libv4l includes wrapper libraries for compatibility and pixel format
* conversion, which are especially useful for users of the gspca usb
* webcam driver in kernel 2.6.27 and higher.
*
* To add v4l2 compatibility to a v4l application 'myapp', launch it via
* LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so myapp
* To add automatic pixel format conversion to a v4l2 application, use
* LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so myapp
*

* Messages for package app-cdr/dvd+rw-tools-7.1-r1:

* When you run growisofs if you receive:
* unable to anonymously mmap 33554432: Resource temporarily unavailable
* error message please run 'ulimit -l unlimited'

* Messages for package sys-auth/pambase-20100310:

* Starting from version 20080801, pambase optionally enables
* SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
* built against sys-libs/glibc-2.7 or later.
* If you don't have support for this, it will automatically fallback
* to MD5-hashed passwords, just like before.
*
* Please note that the change only affects the newly-changed passwords
* and that SHA512-hashed passwords will not work on earlier versions
* of glibc or Linux-PAM.

* Messages for package app-admin/eselect-opengl-1.1.1-r2:

* eselect-opengl since version 1.0.9 strips the libGL.la file.
* This file was broken by design and thus removed.
* For fixing all sort of configure issues please run:
* lafilefixer --justfixit
* or run revdep-rebuild if you update from any older release.
* (lafilefixer package can be found as dev-util/lafilefixer)

* Messages for package app-admin/eselect-wxwidgets-1.4:

* By default the system wxWidgets profile is set to "none".
*
* It is unnecessary to change this unless you are doing development work
* with wxGTK outside of portage. The package manager ignores the profile
* setting altogether.

* Messages for package sys-apps/hotplug-20040923-r2:

* WARNING: The hotplug init script is now gone (dead and buried).
* WARNING: If you want to load modules for hardware that was already
* WARNING: discovered at boot time, like the old hotplug init script
* WARNING: did, then emerge the coldplug package, and add coldplug to
* WARNING: a runlevel, e.g. # rc-update add coldplug boot
* WARNING: All firmware loaded by the hotplug scripts needs to be
* WARNING: moved to the /lib/firmware directory, as the scripts now
* WARNING: expect it to be in that location.
* If you still have the file /etc/hotplug/isapnp.rc on your system,
* please delete it by hand, the file /etc/hotplug/pnp.rc supercedes it.

* Messages for package dev-libs/nss-3.12.6-r1:

* We have reverted back to using upstreams soname.
* Please run revdep-rebuild --library libnss3.so.12 , this
* will correct most issues. If you find a binary that does
* not run please re-emerge package to ensure it properly
* links after upgrade.
*

* Messages for package sys-devel/libtool-2.2.6b:

* Old versions of installed libraries were detected on your system.
* In order to avoid breaking packages that depend on these old libs,
* the libraries are not being removed. You need to run revdep-rebuild
* in order to remove these old dependencies. If you do not have this
* helper program, simply emerge the 'gentoolkit' package.
*
* # revdep-rebuild --library libltdl.so.3
*
* Once you've finished running revdep-rebuild, it should be safe to
* delete the old libraries. Here is a copy & paste for the lazy:
* # rm '/usr/lib/libltdl.so.3'

* Messages for package dev-libs/libpcre-7.9-r1:

* This version of libpcre has stopped installing .la files. This may
* cause compilation failures in other packages. To fix this problem,
* install dev-util/lafilefixer and run:
* lafilefixer --justfixit

* Messages for package dev-util/ccache-2.4-r7:

* To use ccache with **non-Portage** C compiling, add
* /usr/lib/ccache/bin to the beginning of your path, before /usr/bin.
* Portage 2.0.46-r11+ will automatically take advantage of ccache with
* no additional steps. If this is your first install of ccache, type
* something like this to set a maximum cache size of 2GB:
* # ccache -M 2G

* Messages for package sys-devel/binutils-2.20.1-r1:

* Sorry, but binutils does not support the LINGUAS: en

* Messages for package sys-libs/gdbm-1.8.3-r4:

* 32bit systems might have to rebuild all gdbm databases due to
* LFS changes in the gdbm format. You can either delete the db
* and regenerate it from scratch, or use the converter:
* http://bugs.gentoo.org/attachment.cgi?id=215326
*
* See this comment for information on how to use it:
* http://bugs.gentoo.org/299390#c15
*
* You should be able to locate most gdbm db's on your system with:
* find /etc /var -type f -exec file {} + | grep 'GNU dbm 1.x or ndbm database'
*
* You could also try using this helper script:
* http://bugs.gentoo.org/attachment.cgi?id=222581

* Messages for package x11-libs/libdrm-2.4.20-r1:

* libdrm's ABI may have changed without change in library name
* Please rebuild media-libs/mesa, x11-base/xorg-server and
* your video drivers in x11-drivers/*.

* Messages for package sys-apps/attr-2.4.43:

* Sorry, but attr does not support the LINGUAS: en ru

* Messages for package dev-libs/libcdio-0.80:

* If you've upgraded from a previous version of libcdio, you may need to re-emerge
* packages that linked against libcdio (vlc, vcdimager and more) by running:
* revdep-rebuild

* Messages for package media-gfx/exiv2-0.19:

*
* PLEASE PLEASE take note of this:
* Please make *sure* to run revdep-rebuild now
* Certain things on your system may have linked against a
* different version of exiv2 -- those things need to be
* recompiled. Sorry for the inconvenience!
*

* Messages for package sys-apps/acl-2.2.49:

* Sorry, but acl does not support the LINGUAS: en ru

* Messages for package media-gfx/sane-backends-1.0.19-r2:

* You can use the variable SANE_BACKENDS to pick backends
* instead of building all of them.

* Messages for package net-misc/wget-1.12:

* The /etc/wget/wgetrc file has been relocated to /etc/wgetrc

* Messages for package net-misc/pavuk-0.9.34-r1:

* ERROR: net-misc/pavuk-0.9.34-r1 failed:
* (no error message)
*
* Call stack:
* ebuild.sh, line 54: Called src_compile
* environment, line 2279: Called die
* The specific snippet of code:
* emake || die
*
* If you need support, post the output of 'emerge --info =net-misc/pavuk-0.9.34-r1',
* the complete build log and the output of 'emerge -pqv =net-misc/pavuk-0.9.34-r1'.
* The complete build log is located at '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/temp/environment'.
* S: '/var/tmp/portage/net-misc/pavuk-0.9.34-r1/work/pavuk-0.9.34'

* Regenerating GNU info directory index...
* Processed 139 info files.

* IMPORTANT: 117 config files in '/etc' need updating.

* IMPORTANT: 84 config files in '/usr/share/X11/xkb' need updating.

* IMPORTANT: 1 config files in '/usr/share/config' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.

* IMPORTANT: 11 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.