пошел как 4 день

cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
kill Xorg link up
localhost ~ #
ls /usr/share/fonts/
100dpi corefonts default misc ttf-bitstream-vera util
75dpi cyrillic encodings terminus Type1

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (root@localhost) Thu Aug 16 21:46:45 UTC 2007

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG L1919S"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
Option "Coolbits" "1"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1280x1024 +0+0; 1280x960 +0+0; 1152x864 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

хоргконфиг делал вот он но с ним не работает чето

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "record"
# Load "xie"
Load "v4l"
Load "type1"
Load "glx"
EndSection

Section "ServerFlags"
Option "allowmouseopenfail"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "Protocol" "Standard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "ZAxisMapping" "4 5"
#Option "Buttons" "7 8"
#Option "ButtonMapping" "1 2 3 6 7 8 9"
Option "Emulate3Buttons" "no"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
EndSection

Section "Monitor"

#1280x1024 @ 76.2 Hz, 81.1 kHz hsync
#Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
#1280x960 @ 75.3 Hz, 75.9 kHz hsync
#Modeline "1280x960" 142.76 1280 1312 1848 1880 960 978 990 1009
#1280x800 @ 75.3 Hz, 63.4 kHz hsync
#Modeline "1280x800" 111.50 1280 1312 1728 1760 800 815 825 841
#1280x768 @ 75.1 Hz, 60.6 kHz hsync
#Modeline "1280x768" 105.64 1280 1312 1712 1744 768 782 792 807
#1280x720 @ 75.1 Hz, 56.8 kHz hsync
#Modeline "1280x720" 97.30 1280 1312 1680 1712 720 734 743 757
#1152x864 @ 69.7 Hz, 62.4 kHz hsync
#Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
#1024x768 @ 75.9 Hz, 62.5 kHz hsync
#Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
#800x600 @ 75.0 Hz, 46.9 kHz hsync
#Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
#640x480 @ 75.0 Hz, 37.5 kHz hsync
#Modeline "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
Identifier "Monitor"
VendorName "GSM"
ModelName "L1919S"
HorizSync 30.0 - 84.0
VertRefresh 56.0 - 76.0
EndSection

Section "Monitor"

#!Description "Super VGA 1024x768 @ 60Hz"
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Identifier "Super VGA"
ModelName "Super VGA"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 90.0
ModeLine "1024x768" 65.0 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "640x480" 25.2 640 664 760 800 480 491 493 525
EndSection

Section "Device"

# Option "NoAccel"
Identifier "Card:NVIDIA GeForce FX (generic)"
Driver "nvidia"
BoardName "NVIDIA GeForce FX (generic)"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card:NVIDIA GeForce FX (generic)"
Monitor "Monitor"
DefaultDepth 24
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1280x960" "1280x800" "1280x768" "1280x720" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection

вот emerge --info
Portage 2.1.2.2 (default-linux/x86/2006.1/desktop, gcc-4.1.2, glibc-2.5-r1, 2.6.19-gentoo-r5p4 i686)
=================================================================
System uname: 2.6.19-gentoo-r5p4 i686 Intel(R) Celeron(R) CPU 2.40GHz
Gentoo Base System release 1.12.9
Timestamp of tree: Fri, 23 Mar 2007 03:50:01 +0000
ccache version 2.4 [disabled]
dev-java/java-config: 1.3.7, 2.0.31-r5
dev-lang/python: 2.4.4
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: 2.4-r6
sys-apps/sandbox: 1.2.18.1
sys-devel/autoconf: 2.13, 2.61
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.17
sys-devel/gcc-config: 1.3.15-r1
sys-devel/libtool: 1.5.23b
virtual/os-headers: 2.6.20-r2
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O3 -pipe -mtune=pentium4 -funroll-loops -fprefetch-loop-arrays -fomit-frame-pointer "
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo"
CXXFLAGS="-march=pentium4 -O3 -pipe -mtune=pentium4 -funroll-loops -fprefetch-loop-arrays -fomit-frame-pointer "
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig buildpkg distlocks metadata-transfer sandbox sfperms strick strict"
GENTOO_MIRRORS="/mnt/cdrom/distfiles/"
LANG="ru_RU.UTF-8"
LC_ALL="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--sort-common -s"
LINGUAS="en ru"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X a52 a52dec aac acpi aim alsa amr arts avi berkdb bitmap-fonts bluetooth cairo cdparanoia cdr cli cracklib crypt cups dbus djvu dri dv dvb dvd dvdnav dvdr dvdread eds emboss encode esd fam ffmpeg fftw firefox flac fltk fortran ftp gdbm gif gnome gphoto2 gpm gstreamer gtk gtk2 hal iconv imagemagick isdnlog jabber jack java jpeg kde ldap libcaca libg++ lirc mad matroska midi mikmod mmx mp3 mpeg mplayer msn musepack ncurses nls nptl nptlonly nsplugin nvidia ogg opengl opera oscar p7zip pam pcre pdf perl png ppds pppd python qt3 qt4 quicktime rar readline real reflection scanner sdl session slp socks5 sox spell spl sse sse2 ssl tcl tcltk tcpd theora tiff tk truetype truetype-fonts ttf type1-fonts unicode usb userlocales v4l videos vorbis win32codecs wma wmf wmv wxwindows x264 x86 xcomposite xface xine xinerama xml xml2 xorg xosd xv xvid yahoo zlib {USE}" ALSA_CARDS="all" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en ru" USERLAND="GNU" VIDEO_CARDS="nvidia"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

а где выключть ACCEPT_KEYWORDS="x86 ~x86" у меня вот мой конф
# Copyright 1999-2006 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id: /var/cvsroot/gentoo-src/portage/cnf/make.conf,v 1.84.2.5 2005/04/13 15:28:38 jstubbs Exp $
# Contains local system settings for Portage system

# Please review 'man make.conf' for more information.

# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=1
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
#
# 'ufed' is an ncurses/dialog interface available in portage to make handling
# useflags for you. 'emerge app-portage/ufed'
#
# Example:
#USE="X gtk gnome dvb dvd mmx sse sse2 gtk2 -ipv6 -debug"

# Host Setting
# ============
#
# DO NOT CHANGE THIS SETTING UNLESS YOU ARE USING STAGE1!
# Change this line as appropriate (i686, i586, i486 or i386).
# All modern systems (even Athlons) should use "i686-pc-linux-gnu".
# All K6's are i586.
CHOST="i686-pc-linux-gnu"

# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU.
#
# Please note that if you experience strange issues with a package, it may be
# due to gcc's optimizations interacting in a strange way. Please test the
# package (and in some cases the libraries it uses) at default optimizations
# before reporting errors to developers.
#
# -mcpu= means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs.
#
# -march= means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
# -march=i686 code will not run on a Pentium Classic.
#
# CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp,
# athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686
# (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron),
# pentium3, and pentium4.
#
# Note that Gentoo Linux 1.4 and higher include at least gcc-3.2.
#
# CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686
# (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95*
#
# CRITICAL WARNINGS: ****************************************************** #
# K6 markings are deceptive. Avoid setting -march for them. See Bug #24379. #
# Pentium-M CPU's should not enable sse2 until at least gcc-3.4. Bug 50616. #
# ************************************************************************* #
#
# Decent examples:
#
#CFLAGS="-mcpu=athlon-xp -O3 -pipe"
CFLAGS="-march=pentium4 -O3 -pipe -mtune=pentium4 -funroll-loops -fprefetch-loop-arrays -fomit-frame-pointer "
LDFLAGS="-Wl,-O1 -Wl,--sort-common -s"
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="nvidia"
ALSA_CARDS="all"
CONFIG_PROTECT="-*"
LC_ALL="en_US.UTF-8"

# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings.
CXXFLAGS="${CFLAGS}"

# Advanced Masking
# ================
#
# Gentoo is using a new masking system to allow for easier stability testing
# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
# on the platform they are set for. A special form has been added that
# indicates packages and revisions that are expected to work, but have not yet
# been approved for the stable set. '~arch' is a superset of 'arch' which
# includes the unstable, in testing, packages. Users of the 'x86' architecture
# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
# '~ppc', '~sparc' are the unstable KEYWORDS for their respective platforms.
#
# Please note that this is not for development, alpha, beta, nor cvs release
# packages. "Broken" packages will not be added to testing and should not be
# requested to be added. Alternative routes are available to developers
# for experimental packages, and it is at their discretion to use them.
#
# DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
#
#ACCEPT_KEYWORDS="~x86"
LINGUAS="en ru"

# Portage Directories
# ===================
#
# Each of these settings controls an aspect of portage's storage and file
# system usage. If you change any of these, be sure it is available when
# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
#
# PORTAGE_TMPDIR is the location portage will use for compilations and
# temporary storage of data. This can get VERY large depending upon
# the application being installed.
#PORTAGE_TMPDIR=/var/tmp
#
# PORTDIR is the location of the portage tree. This is the repository
# for all profile information as well as all ebuilds. If you change
# this, you must update your /etc/make.profile symlink accordingly.
PORTDIR=/usr/portage
#
# DISTDIR is where all of the source code tarballs will be placed for
# emerges. The source code is maintained here unless you delete
# it. The entire repository of tarballs for gentoo is 9G. This is
# considerably more than any user will ever download. 2-3G is
# a large DISTDIR.
DISTDIR=/usr/portage/distfiles
# PKGDIR is the location of binary packages that you can have created
# with '--buildpkg' or '-b' while emerging a package. This can get
# upto several hundred megs, or even a few gigs.
PKGDIR=${PORTDIR}/packages
#
# PORT_LOGDIR is the location where portage will store all the logs it
# creates from each individual merge. They are stored as NNNN-$PF.log
# in the directory specified. This is disabled until you enable it by
# providing a directory. Permissions will be modified as needed IF the
# directory exists, otherwise logging will be disabled. NNNN is the
# increment at the time the log is created. Logs are thus sequential.
#PORT_LOGDIR=/var/log/portage
#
# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
# concern that they will be deleted by rsync updates. Default is not
# defined.
PORTDIR_OVERLAY=/usr/local/portage

# Fetching files
# ==============
#
# If you need to set a proxy for wget or lukemftp, add the appropriate "export
# ftp_proxy=
" and "export http_proxy=
" lines to /etc/profile if
# all users on your system should use them.
#
# Portage uses wget by default. Here are some settings for some alternate
# downloaders -- note that you need to merge these programs first before they
# will be available.
#
# Default fetch command (5 tries, passive ftp for firewall compatibility)
#FETCHCOMMAND="/usr/bin/wget -t 5 -T 60 --passive-ftp \${URI} -P \${DISTDIR}"
#RESUMECOMMAND="/usr/bin/wget -c -t 5 -T 60 --passive-ftp \${URI} -P \${DISTDIR}"
#
# Using wget, ratelimiting downloads
FETCHCOMMAND="/usr/bin/wget -t 5 -T 60 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
#RESUMECOMMAND="/usr/bin/wget -c -t 5 -T 60 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
#
# Lukemftp (BSD ftp):
#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
#
# Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval.
# The list is a space separated list which is read left to right. If you use
# another mirror we highly recommend leaving the default mirror at the end of
# the list so that portage will fall back to it if the files cannot be found
# on your specified mirror. We _HIGHLY_ recommend that you change this setting
# to a nearby mirror by merging and using the 'mirrorselect' tool.
GENTOO_MIRRORS="/mnt/cdrom/distfiles/"
#
# Portage uses PORTAGE_BINHOST to specify mirrors for prebuilt-binary packages.
# The list is a single entry specifying the full address of the directory
# serving the tbz2's for your system. Running emerge with either '--getbinpkg'
# or '--getbinpkgonly' will cause portage to retrieve the metadata from all
# packages in the directory specified, and use that data to determine what will
# be downloaded and merged. '-g' or '-gK' are the recommend parameters. Please
# consult the man pages and 'emerge --help' for more information. For FTP, the
# default connection is passive -- If you require an active connection, affix
# an asterisk (*) to the end of the host:port string before the path.
#PORTAGE_BINHOST="http://grp.mirror.site/gentoo/grp/1.4/i686/athlon-xp/"
# This ftp connection is passive ftp.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site/pub/grp/i686/athlon-xp/"
# This ftp connection is active ftp.
#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site:21*/pub/grp/i686/athlon-xp/"

# Synchronizing Portage
# =====================
#
# Each of these settings affects how Gentoo synchronizes your Portage tree.
# Synchronization is handled by rsync and these settings allow some control
# over how it is done.
#
#
# SYNC is the server used by rsync to retrieve a localized rsync mirror
# rotation. This allows you to select servers that are geographically
# close to you, yet still distribute the load over a number of servers.
# Please do not single out specific rsync mirrors. Doing so places undue
# stress on particular mirrors. Instead you may use one of the following
# continent specific rotations:
#
# Default: "rsync://rsync.gentoo.org/gentoo-portage"
# North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage"
# South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage"
# Europe: "rsync://rsync.europe.gentoo.org/gentoo-portage"
# Asia: "rsync://rsync.asia.gentoo.org/gentoo-portage"
# Australia: "rsync://rsync.au.gentoo.org/gentoo-portage"
#SYNC="rsync://rsync.gentoo.org/gentoo-portage"
#
# PORTAGE_RSYNC_RETRIES sets the number of times portage will attempt to retrieve
# a current portage tree before it exits with an error. This allows
# for a more successful retrieval without user intervention most times.
#PORTAGE_RSYNC_RETRIES="3"
#
# PORTAGE_RSYNC_EXTRA_OPTS can be used to feed additional options to the rsync
# command used by `emerge --sync`. This will not change the default options
# which are set by PORTAGE_RSYNC_OPTS (don't change those unless you know
# exactly what you're doing).
#PORTAGE_RSYNC_EXTRA_OPTS=""
#
# Advanced Features
# =================
#
# EMERGE_DEFAULT_OPTS allows emerge to act as if certain options are
# specified on every run. Useful options include --ask, --verbose,
# --usepkg and many others. Options that are not useful, such as --help,
# are not filtered.
#EMERGE_DEFAULT_OPTS=""
#
# MAKEOPTS provides extra options that may be passed to 'make' when a
# program is compiled. Presently the only use is for specifying
# the number of parallel makes (-j) to perform. The suggested number
# for parallel makes is CPUs+1.
MAKEOPTS="-j3"
#
# PORTAGE_NICENESS provides a default increment to emerge's niceness level.
# Note: This is an increment. Running emerge in a niced environment will
# reduce it further. Default is unset.
#PORTAGE_NICENESS=3
#
# AUTOCLEAN enables portage to automatically clean out older or overlapping
# packages from the system after every successful merge. This is the
# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
# This does not affect the unpacked source. See 'noclean' below.
#
# Warning: AUTOCLEAN="no" can cause serious problems due to overlapping
# packages. Do not use it unless absolutely necessary!
AUTOCLEAN="yes"
#
# PORTAGE_TMPFS is a location where portage may create temporary files.
# If specified, portage will use this directory whenever possible
# for all rapid operations such as lockfiles and transient data.
# It is _highly_ recommended that this be a tmpfs or ramdisk. Do not
# set this to anything that does not give a significant performance
# enhancement and proper FS compliance for locks and read/write.
# /dev/shm is a glibc mandated tmpfs, and should be a reasonable
# setting for all linux kernel+glibc based systems.
#PORTAGE_TMPFS="/dev/shm"
LANGUAGE="ru"
#

# FEATURES are settings that affect the functionality of portage. Most of
# these settings are for developer use, but some are available to non-
# developers as well.
#
# 'assume-digests'
# when commiting work to cvs with repoman(1), assume that all
# existing SRC_URI digests are correct. This feature also
# affects digest generation via ebuild(1) and emerge(1) (emerge
# generates digests only when the 'digest' feature is enabled).
# 'autoaddcvs' causes portage to automatically try to add files to cvs
# that will have to be added later. Done at generation times
# and only has an effect when 'cvs' is also set.
# 'buildpkg' causes binary packages to be created of all packages that
# are being merged.
# 'ccache' enables ccache support via CC.
# 'confcache' enable confcache support; speeds up autotool based configure
# calls
# 'collision-protect'
# prevents packages from overwriting files that are owned by
# another package or by no package at all.
# 'cvs' causes portage to enable all cvs features (commits, adds),
# and to apply all USE flags in SRC_URI for digests -- for
# developers only.
# 'digest' autogenerate digests for packages when running the emerge(1)
# command. If the 'assume-digests' feature is also enabled then
# existing SRC_URI digests will be reused whenever they are
# available.
# 'distcc' enables distcc support via CC.
# 'distlocks' enables distfiles locking using fcntl or hardlinks. This
# is enabled by default. Tools exist to help clean the locks
# after crashes: /usr/lib/portage/bin/clean_locks.
# 'fixpackages' allows portage to fix binary packages that are stored in
# PKGDIR. This can consume a lot of time. 'fixpackages' is
# also a script that can be run at any given time to force
# the same actions.
# 'gpg' enables basic verification of Manifest files using gpg.
# This features is UNDER DEVELOPMENT and reacts to features
# of strict and severe. Heavy use of gpg sigs is coming.
# 'keeptemp' prevents the clean phase from deleting the temp files ($T)
# from a merge.
# 'keepwork' prevents the clean phase from deleting the WORKDIR.
# 'test' causes ebuilds to perform testing phases if they are capable
# of it. Some packages support this automaticaly via makefiles.
# 'metadata-transfer'
# automatically perform a metadata transfer when `emerge --sync`
# is run.
# 'noauto' causes ebuild to perform only the action requested and
# not any other required actions like clean or unpack -- for
# debugging purposes only.
# 'noclean' prevents portage from removing the source and temporary files
# after a merge -- for debugging purposes only.
# 'nostrip' prevents the stripping of binaries.
# 'notitles' disables xterm titlebar updates (which contain status info).
# 'parallel-fetch'
# do fetching in parallel to compilation
# 'sandbox' enables sandboxing when running emerge and ebuild.
# 'strict' causes portage to react strongly to conditions that are
# potentially dangerous, like missing/incorrect Manifest files.
# 'userfetch' when portage is run as root, drop privileges to
# portage:portage during the fetching of package sources.
# 'userpriv' allows portage to drop root privileges while it is compiling,
# as a security measure. As a side effect this can remove
# sandbox access violations for users.
# 'usersandbox' enables sandboxing while portage is running under userpriv.
FEATURES="autoconfig sandbox sfperms strick buildpkg metadata-transfer"
#FEATURES="sandbox ccache distcc distlocks autoaddcvs"
#
# CCACHE_SIZE sets the space use limitations for ccache. The default size is
# 2G, and will be set if not defined otherwise and ccache is in features.
# Portage will set the default ccache dir if it is not present in the
# user's environment, for userpriv it sets: ${PORTAGE_TMPDIR}/ccache
# (/var/tmp/ccache), and for regular use the default is /root/.ccache.
# Sizes are specified with 'G' 'M' or 'K'.
# '2G' for 2 gigabytes, '2048M' for 2048 megabytes (same as 2G).
#CCACHE_SIZE="512M"
#
# DISTCC_DIR sets the temporary space used by distcc.
#DISTCC_DIR="${PORTAGE_TMPDIR}/.distcc"

# logging related variables:
# PORTAGE_ELOG_CLASSES: selects messages to be logged, possible values are:
# info, warn, error, log
# Warning: commenting this will disable elog
PORTAGE_ELOG_CLASSES="warn error log"

# PORTAGE_ELOG_SYSTEM: selects the module(s) to process the log messages. Modules
# included in portage are (empty means logging is disabled):
# save (saves one log per package in $PORT_LOGDIR/elog,
# /var/log/portage/elog if $PORT_LOGDIR is unset)
# custom (passes all messages to $PORTAGE_ELOG_COMMAND)
# syslog (sends all messages to syslog)
# mail (send all messages to the mailserver defined
# in $PORTAGE_ELOG_MAILURI)
# To use elog you should enable at least one module
#PORTAGE_ELOG_SYSTEM="save mail"

# PORTAGE_ELOG_COMMAND: only used with the "custom" logging module. Specifies a command
# to process log messages. Two variables are expanded:
# ${PACKAGE} - expands to the cpv entry of the processed
# package (see $PVR in ebuild(5))
# ${LOGFILE} - absolute path to the logfile
# Both variables have to be quoted with single quotes
#PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '\${PACKAGE}' -f '\${LOGFILE}'"

# PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
# module. In most cases listing the recipient address and
# the receiving mailserver should be sufficient, but you can
# also use advanced settings like authentication or TLS. The
# full syntax is:
# address [[user:passwd@]mailserver[:port]]
# where
# address: recipient address
# user: username for smtp auth (defaults to none)
# passwd: password for smtp auth (defaults to none)
# mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
# port: port to use on the given smtp server (defaults to 25, values > 100000 indicate that starttls should be used on (port-100000))
# Examples:
#PORTAGE_ELOG_MAILURI="root@localhost localhost" (this is also the default setting)
#PORTAGE_ELOG_MAILURI="user@some.domain mail.some.domain" (sends mails to

using the mailserver mail.some.domain)
#PORTAGE_ELOG_MAILURI="user@some.domain user:secret@mail.some.domain:100465" (this is left uncommented as a reader excercise ;)

# PORTAGE_ELOG_MAILFROM: you can set the from-address of logmails with this variable,
# if unset mails are sent by "portage" (this default may fail
# in some environments).
#PORTAGE_ELOG_MAILFROM="portage@some.domain"

# PORTAGE_ELOG_MAILSUBJECT: template string to be used as subject for logmails. The following
# variables are exanded:
# ${PACKAGE} - see description of PORTAGE_ELOG_COMMAND
# ${HOST} - FQDN of the host portage is running on
#PORTAGE_ELOG_MAILSUBJECT="package \${PACKAGE} merged on \${HOST} with notice"