Главная » Форум » Gentoo Linux » X и оконные менеджеры

Проблемы с Compiz-ом [SOLVED]

fxm 7 июля, 2009 - 22:27

Доброго времени суток!

не могу запустить Compiz на GTX 260. вот, что он пишет в консоль:

$ compiz-manager --replace
Checking for Xgl: not present. 
Detected PCI ID for VGA: 01:00.0 0300: 10de:05e2 (rev a1) (prog-if 00 [VGA controller])
Checking for texture_from_pixmap: present. 
Checking for non power of two support: present. 
Checking for Composite extension: present. 
Comparing resolution (1920x1200) to maximum 3D texture size (8192): Passed.
Checking for nVidia: present. 
Checking for FBConfig: present. 
Checking for Xgl: not present. 
Starting gtk-window-decorator

дальше ничего не происходит =) ну если не считать проподания декораций окон =))

drivers:

*  x11-drivers/nvidia-drivers
      Latest version available: 180.29
      Latest version installed: 180.29
      Size of files: 51,046 kB
      Homepage:      http://www.nvidia.com/
      Description:   NVIDIA X11 driver and GLX libraries
      License:       NVIDIA

/etc/X11/xorg.conf:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib64/xorg/modules"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1/"
	FontPath     "/usr/share/fonts/100dpi/"
	FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
	Load  "glx"
	Load  "extmod"
	Load  "xtrap"
	Load  "record"
	Load  "dbe"
#	Load  "dri"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
        Option         "XkbLayout" "us,ru"
        Option         "XkbOptions" "grp:ctrl_shift_toggle,grp_led::scroll"
        Option         "XkbVariant" ",winkeys"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "Unknown Board"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
[code]

/var/log/Xorg.0.log:
[code]
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-gentoo-r5 x86_64 
Current Operating System: Linux gentoo.nzgw.local 2.6.29-gentoo-r5 #8 SMP Tue Jul 7 18:39:10 MSD 2009 x86_64
Build Date: 06 July 2009  05:53:47PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul  8 02:14:03 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/lib64/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x3300
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation unknown chipset (0x05e2) rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfa000000/33554432, I/O @ 0x00008c00/128, BIOS @ 0x????????/524288
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"

(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.29  Thu Feb  5 00:05:47 PST 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"

(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"

(II) Loading /usr/lib64/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"

(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"

(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"

(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  180.29  Wed Feb  4 23:45:20 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"

(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 917504 kBytes
(--) NVIDIA(0): VideoBIOS: 62.00.1a.00.0a
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0:
(--) NVIDIA(0):     NEC LCD2470WNX (DFP-1)
(--) NVIDIA(0): NEC LCD2470WNX (DFP-1): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): NEC LCD2470WNX (DFP-1): Internal Dual Link TMDS
(WW) NVIDIA(0): The EDID for NEC LCD2470WNX (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (28.000-92.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "1920x1080".
(WW) NVIDIA(0): The EDID for NEC LCD2470WNX (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid VertRefresh range (50.000-85.000 Hz) would exclude
(WW) NVIDIA(0):     this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0):     check for mode "1920x1080".
(WW) NVIDIA(0): The EDID for NEC LCD2470WNX (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid HorizSync range (28.000-92.000 kHz) would exclude
(WW) NVIDIA(0):     this mode's HorizSync (27.0 kHz); ignoring HorizSync check
(WW) NVIDIA(0):     for mode "1920x1080".
(WW) NVIDIA(0): The EDID for NEC LCD2470WNX (DFP-1) contradicts itself: mode
(WW) NVIDIA(0):     "1920x1080" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0):     valid VertRefresh range (50.000-85.000 Hz) would exclude
(WW) NVIDIA(0):     this mode's VertRefresh (24.0 Hz); ignoring VertRefresh
(WW) NVIDIA(0):     check for mode "1920x1080".
(II) NVIDIA(0): Assigned Display Device: DFP-1
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"

(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 2.1.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Razer DeathAdder
(**) Razer DeathAdder: always reports core events
(**) Razer DeathAdder: Device: "/dev/input/event3"
(II) Razer DeathAdder: Found 8 mouse buttons
(II) Razer DeathAdder: Found x and y relative axes
(II) Razer DeathAdder: Configuring as mouse
(**) Razer DeathAdder: YAxisMapping: buttons 4 and 5
(**) Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Razer DeathAdder" (type: MOUSE)
‹ kde 4.2 не загружаются [Решено] А что у Kopete больше нет аси? ›
»

А что должно

Автор athost, дата создания 7 июля, 2009 - 22:54.

А что должно произойти?

Запусти ccsm, включи плагин декорации окон и другие плагины по-вкусу

»

eselect opengl делали?

Автор Aid, дата создания 7 июля, 2009 - 23:09.

eselect opengl делали?

—

Говорят, что Йа такое-же быдло как и все, господа хорошие, для системы ценностей большинства людей йА зНаЧиТеЛьНо хУже!(с) mr.Freeman

»

Цитата:eselect opengl

Автор izbushka, дата создания 8 июля, 2009 - 08:57.
Цитата:
eselect opengl делали?

Видимо да,т.к.:

Цитата:
(II) Loading extension NV-GLX

Запустите декоратор: emerald --replace

»

Option

Автор Pinkbyte, дата создания 8 июля, 2009 - 09:04.
    Option         "AddARGBGLXVisuals" "True"

Добавьте это в секцию Device в xorg.conf

—

Нейтральность - высшее достижение сознания!

»

все заработало =)

Автор fxm, дата создания 13 июля, 2009 - 18:25.

хмм... я просто изначально включил только куб рабочего стола, но желаемого эффекта не увидел =) из чего решил, что ничего не работает. теперь разобрался и практически все хорошо... есть только одна проблемка, но для нее я заведу отдельную тем =)

все спасибо!

»

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".