Трабла с иксами [solved]

Всем доброго времени суток) решил опять поставить генту, дошел до установки иксов, все скомпилилось, без, но запустить иксы не удается. После установки запускал 'Xorg -configure' затем при запуске 'X -config /root/Xorg.config.new' наблюдаю полусекундное появление заставки NVidia, затем пустой экран, а потом появляется приглашение в консоли. Дрова nvidia-drivers-180.29. Прикладываю к посту make.conf, xorg.cong.new в сокращении и /var/log/Xorg.0.log с того места, где загружаются модули nvidia
xorg.conf.new:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection
[удалил]
Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "nVidia Corporation"
	BoardName   "Unknown Board"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		[удалил]
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

make.conf:

CFLAGS="-O2 -mtune=i686 -pipe"
CXXFLAGS="-O2 -mtune=i686 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="i486-pc-linux-gnu"
IMPUT_DEVISES="keyboard mouse"
VIDEO_CARDS="nvidia vesa"
USE="X dri freetype fontforge unicode"

Xorg.0.log:

X Window System Version 1.3.0
[зесь я удалил кучу буковок]
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) NVIDIA dlloader X Driver  180.29  Wed Feb  4 23:50:44 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(WW) Warning, couldn't open module wfb
(II) UnloadModule: "wfb"
(EE) Failed to load module "wfb" (module does not exist, 0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[цыфирьки]	
(II) Setting vga for screen 0.
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
(EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
(EE) NVIDIA(0):     you continue to encounter problems, Please try
(EE) NVIDIA(0):     reinstalling the NVIDIA driver.
(II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 62.92.1a.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0:
(--) NVIDIA(0):     LG L1918S (CRT-0)
(--) NVIDIA(0): LG L1918S (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0): 
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0): 
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[еще цыфирьки]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0):     configuration option may not be set correctly.  When the
(II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0):     Config Options in the README.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(EE) NVIDIA(0): Need libwfb but wfbScreenInit not found

Fatal server error:
AddScreen/ScreenInit failed for driver 0