tvtime & xvoutput

В кедах 3,5,10 всё работало нормально, в 4,2 при запуске tvtime -v вылазит ошибка:

Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/hibiky/.tvtime/tvtime.xml
cpuinfo: CPU AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, family 15, model 11, stepping 2.
cpuinfo: CPU measured at 2305.229MHz.
tvtime: Cannot set priority to -10: Отказано в доступе.
xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 10503000
xfullscreen: Single-head detected, pixel aspect will be calculated.
xfullscreen: Pixel aspect ratio on the primary head is: 1/1 == 1.00.
xfullscreen: Using the XFree86-VidModeExtension to calculate fullscreen size.
xfullscreen: Fullscreen to 0,0 with size 1024x768.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1:1.
xcommon: Pixel aspect ratio 1:1.
xcommon: Window manager is KWin and is EWMH compliant.
xcommon: Using EWMH state fullscreen property.
xcommon: Using EWMH state above property.
xcommon: Using EWMH state below property.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xvoutput: No XVIDEO port found which supports YUY2 images.

*** tvtime requires hardware YUY2 overlay support from your video card
*** driver.  If you are using an older NVIDIA card (TNT2), then
*** this capability is only available with their binary drivers.
*** For some ATI cards, this feature may be found in the experimental
*** GATOS drivers: http://gatos.souceforge.net/
*** If unsure, please check with your distribution to see if your
*** X driver supports hardware overlay surfaces.

Я так думаю что всё дело в дровах radeonhd с моей атишной видюхой 4670. Может есть другой способ решить проблему с tvtime?

Ладно раз ответов не было

Ладно раз ответов не было пришлось ставить ati-drivers.
Но они тянут за собой libstdc++-v3-3.3.6 и компиляция оканчивается одной и той же ошибкой:

ar  rc 32/libgcc.a libgcc/32/_muldi3.oS libgcc/32/_negdi2.oS libgcc/32/_lshrdi3.oS libgcc/32/_ashldi3.oS libgcc/32/_ashrdi3.oS libgcc/32/_ffsdi2.oS libgcc/32/_clz.oS libgcc/32/_cmpdi2.oS libgcc/32/_ucmpdi2.oS libgcc/32/_floatdidf.oS libgcc/32/_floatdisf.oS libgcc/32/_fixunsdfsi.oS libgcc/32/_fixunssfsi.oS libgcc/32/_fixunsdfdi.oS libgcc/32/_fixdfdi.oS libgcc/32/_fixunssfdi.oS libgcc/32/_fixsfdi.oS libgcc/32/_fixxfdi.oS libgcc/32/_fixunsxfdi.oS libgcc/32/_floatdixf.oS libgcc/32/_fixunsxfsi.oS libgcc/32/_fixtfdi.oS libgcc/32/_fixunstfdi.oS libgcc/32/_floatditf.oS libgcc/32/_clear_cache.oS libgcc/32/_trampoline.oS libgcc/32/__main.oS libgcc/32/_exit.oS libgcc/32/_absvsi2.oS libgcc/32/_absvdi2.oS libgcc/32/_addvsi3.oS libgcc/32/_addvdi3.oS libgcc/32/_subvsi3.oS libgcc/32/_subvdi3.oS libgcc/32/_mulvsi3.oS libgcc/32/_mulvdi3.oS libgcc/32/_negvsi2.oS libgcc/32/_negvdi2.oS libgcc/32/_ctors.oS libgcc/32/_divdi3.oS libgcc/32/_moddi3.oS libgcc/32/_udivdi3.oS libgcc/32/_umoddi3.oS libgcc/32/_udiv_w_sdiv.oS libgcc/32/_udivmoddi4.oS libgcc/32/_eprintf.oS libgcc/32/_bb.oS libgcc/32/__gcc_bcmp.oS
if [ -f ranlib ] || ( [ x86_64-pc-linux-gnu = x86_64-pc-linux-gnu ] && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] ) ; then \
	  ranlib 32/libgcc.a ; \
	else true; fi;
/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc/xgcc -B/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc/ -B/usr/x86_64-pc-linux-gnu/bin/ -B/usr/x86_64-pc-linux-gnu/lib/ -isystem /usr/x86_64-pc-linux-gnu/include -O2  -DIN_GCC    -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -isystem ./include  -fPIC -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  -shared -nodefaultlibs -Wl,--soname=libgcc_s.so.1 -Wl,--version-script=libgcc/32/libgcc.map -o 32/libgcc_s.so.1.tmp  -m32  libgcc/32/_muldi3.o libgcc/32/_negdi2.o libgcc/32/_lshrdi3.o libgcc/32/_ashldi3.o libgcc/32/_ashrdi3.o libgcc/32/_ffsdi2.o libgcc/32/_clz.o libgcc/32/_cmpdi2.o libgcc/32/_ucmpdi2.o libgcc/32/_floatdidf.o libgcc/32/_floatdisf.o libgcc/32/_fixunsdfsi.o libgcc/32/_fixunssfsi.o libgcc/32/_fixunsdfdi.o libgcc/32/_fixdfdi.o libgcc/32/_fixunssfdi.o libgcc/32/_fixsfdi.o libgcc/32/_fixxfdi.o libgcc/32/_fixunsxfdi.o libgcc/32/_floatdixf.o libgcc/32/_fixunsxfsi.o libgcc/32/_fixtfdi.o libgcc/32/_fixunstfdi.o libgcc/32/_floatditf.o libgcc/32/_clear_cache.o libgcc/32/_trampoline.o libgcc/32/__main.o libgcc/32/_exit.o libgcc/32/_absvsi2.o libgcc/32/_absvdi2.o libgcc/32/_addvsi3.o libgcc/32/_addvdi3.o libgcc/32/_subvsi3.o libgcc/32/_subvdi3.o libgcc/32/_mulvsi3.o libgcc/32/_mulvdi3.o libgcc/32/_negvsi2.o libgcc/32/_negvdi2.o libgcc/32/_ctors.o libgcc/32/_divdi3.o libgcc/32/_moddi3.o libgcc/32/_udivdi3.o libgcc/32/_umoddi3.o libgcc/32/_udiv_w_sdiv.o libgcc/32/_udivmoddi4.o  libgcc/32/unwind-dw2.o libgcc/32/unwind-dw2-fde-glibc.o libgcc/32/unwind-sjlj.o libgcc/32/unwind-c.o -lc && rm -f libgcc_s_32.so && if [ -f 32/libgcc_s.so.1 ]; then mv -f 32/libgcc_s.so.1 32/libgcc_s.so.1.backup; else true; fi && mv 32/libgcc_s.so.1.tmp 32/libgcc_s.so.1 && ln -s 32/libgcc_s.so.1 libgcc_s_32.so
collect2: ld terminated with signal 11 [Ошибка сегментирования]
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib64/../lib/libc.so when searching for -lc
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib64/../lib/libc.a when searching for -lc
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib64/libc.so when searching for -lc
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib64/libc.a when searching for -lc
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/../lib/libc.so when searching for -lc
/usr/x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/../lib/libc.a when searching for -lc
/usr/x86_64-pc-linux-gnu/bin/ld: i386:x86-64 architecture of input file `/usr/lib64/../lib/crti.o' is incompatible with i386 output
/usr/x86_64-pc-linux-gnu/bin/ld: i386:x86-64 architecture of input file `/usr/lib64/../lib/crtn.o' is incompatible with i386 output
make[2]: *** [32/libgcc_s_32.so] Ошибка 1
make[2]: Leaving directory `/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc'
make[1]: *** [stmp-multilib] Ошибка 2
make[1]: Leaving directory `/var/tmp/portage/sys-libs/libstdc++-v3-3.3.6/work/build/gcc'
make: *** [all-gcc] Ошибка 2

emerge --info

Portage 2.1.6.7 (default/linux/amd64/2008.0, gcc-4.3.3, glibc-2.9_p20081201-r2, 2.6.28-gentoo-r2 x86_64)
=================================================================
System uname: Linux-2.6.28-gentoo-r2-x86_64-AMD_Athlon-tm-_64_X2_Dual_Core_Processor_4400+-with-glibc2.2.5
Timestamp of tree: Tue, 17 Feb 2009 01:45:02 +0000
ccache version 2.4 [enabled]
app-shells/bash:     3.2_p48-r1
dev-java/java-config: 2.1.7
dev-lang/python:     2.5.4-r2
dev-util/ccache:     2.4-r8
dev-util/cmake:      2.6.2-r1
sys-apps/baselayout: 2.0.0
sys-apps/openrc:     0.4.3-r1
sys-apps/sandbox:    1.3.7
sys-devel/autoconf:  2.13, 2.63
sys-devel/automake:  1.5, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils:  2.19.1
sys-devel/gcc-config: 1.4.1
sys-devel/libtool:   2.2.6a
virtual/os-headers:  2.6.28-r1
ACCEPT_KEYWORDS="amd64 ~amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe -ftree-vectorize -fomit-frame-pointer"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release
/etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-march=k8 -O2 -pipe -ftree-vectorize -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="buildpkg ccache distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LANG="ru_RU.UTF-8"
LC_ALL=""
LDFLAGS="-Wl,-O1"
LINGUAS="ru en"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="3dnow X aac acl acpi alsa amd64 berkdb bzip2 cdr cli cracklib crypt dga directfb dri dts dvd dvdr dvdread encode fbcon ffmpeg firefox flac fortran ftp gdbm gif gpm gtk hal hddtemp iconv ipv6 isdnlog jpeg kde lirc lm_sensors mad matroska midi mmx mozilla mp3 mpeg mplayer mudflap multilib ncurses nls nptl nptlonly ogg opengl openmp pam pcre pdf perl png pppd python qt3 qt4 quicktime readline reflection samba session slang spl sse sse2 ssl svg symlink sysfs syslog tcpd theora tiff truetype unicode usb v4l v4l2 vorbis webkit xorg xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi
null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="ru en" LIRC_DEVICES="devinput" USERLAND="GNU" VIDEO_CARDS="fglrx"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS 

По-моему у меня был такой

По-моему у меня был такой косяк, помог поиск по bugs.gentoo.org

Текстовый редактор vi имеет два режима работы: в первом он пищит, а во втором — всё портит.

Погорячился :)

Искал, нашёл на http://www.gentoo.ru/node/13890.

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".