ati-drivers-8.561 и xorg-7.4

Помогите, все работало с xorg-7.2 и ati-drivers-8.471.3. А теперь решил обновиться поставить xorg-7.4, а он требует >=ati-drivers-8.552-r2.
Пытаюсь установить ati-drivers-8.561 и вылезает следующая ошибка (тоже самое с ati-drivers-8.552-r2):

Calculating dependencies... done!

>>> Verifying ebuild manifest

>>> Starting parallel fetch

>>> Emerging (1 of 2) x11-drivers/ati-drivers-8.561
* ati-driver-installer-8-12-x86.x86_64.run RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found kernel object directory:
* /lib/modules/2.6.25-gentoo-r7/build
* Found sources for kernel version:
* 2.6.25-gentoo-r7
>>> Unpacking source...
Warning: target directory exists /var/tmp/portage/x11-drivers/ati-drivers-8.561/work
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver- .561..........................................................................................
..........................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
............................
* Applying ati-drivers-xen-8.552.patch ... [ ok ]
* Applying ati-powermode-opt-path-2.patch ... [ ok ]
* Converting 2.6.x/Makefile to use M= instead of SUBDIRS= ... [ ok ]
>>> Unpacking ./../common/usr/src/ati/fglrx_sample_source.tgz to /var/tmp/portage/x11-drivers/ati-drivers-8.561/work/extra
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/x11-drivers/ati-drivers-8.561/work ...
* Preparing fglrx module
make -j2 HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= GCC_VER_MAJ=4 KVER=2.6.25-gentoo-r7 KDIR=/usr/src/linux kmod_build
make -C /usr/src/linux M=/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/linux-2.6.25-gentoo-r7'
CC [M] /var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
CC [M] /var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_acpi.o
CC [M] /var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_agp.o
CC [M] /var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_debug.o
CC [M] /var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c: В функции ‘KCL_IOCTL_RegisterConversion32’
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c:174: ошибка: implicit declaration of function ‘register_ioctl32_conversion’
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c:174: ошибка: ‘ioctl_trans_handler_t’ undeclared (first use in this function)
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c:174: ошибка: (Each undeclared identifier is reported only once
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c:174: ошибка: for each function it appears in.)
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c:174: ошибка: expected ‘)’ before ‘handler’
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c: В функции ‘KCL_IOCTL_UnregisterConversion32’
/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.c:186: ошибка: implicit declaration of function ‘unregister_ioctl32_conversion’
make[2]: *** [/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x/kcl_ioctl.o] Ошибка 1
make[2]: *** Ожидание завершения заданий...
make[1]: *** [_module_/var/tmp/portage/x11-drivers/ati-drivers-8.561/work/common/lib/modules/fglrx/build_mod/2.6.x] Ошибка 2
make[1]: Leaving directory `/usr/src/linux-2.6.25-gentoo-r7'
make: *** [kmod_build] Ошибка 2
*
* ERROR: x11-drivers/ati-drivers-8.561 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3295: Called linux-mod_src_compile
* environment, line 2499: Called die
* The specific snippet of code:
* eval "emake HOSTCC="$(tc-getBUILD_CC)"
CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES}
${BUILD_PARAMS} ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES}
${BUILD_PARAMS} ${BUILD_TARGETS}";
* The die message:
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= GCC_VER_MAJ=4 KVER=2.6.25-gentoo-r7 KDIR=/usr/src/linux kmod_build
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-drivers/ati-drivers-8.561/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-drivers/ati-drivers-8.561/temp/environment'.
* This ebuild is from an overlay: '/home/portage/'
*

>>> Failed to emerge x11-drivers/ati-drivers-8.561, Log file:

>>> '/var/tmp/portage/x11-drivers/ati-drivers-8.561/temp/build.log'

* Messages for package x11-drivers/ati-drivers-8.561:

*
* ERROR: x11-drivers/ati-drivers-8.561 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 3295: Called linux-mod_src_compile
* environment, line 2499: Called die
* The specific snippet of code:
* eval "emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}-
LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS}
${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CROSS_COMPILE=${CHOST}- LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
* The die message:
* Unable to emake HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- LDFLAGS= GCC_VER_MAJ=4 KVER=2.6.25-gentoo-r7 KDIR=/usr/src/linux kmod_build
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-drivers/ati-drivers-8.561/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-drivers/ati-drivers-8.561/temp/environment'.
* This ebuild is from an overlay: '/home/portage/'
*

Может кто сталкивался?

#uname -a
Linux annet 2.6.25-gentoo-r7 #1 SMP PREEMPT Thu Jan 1 16:42:12 Local time zone must be set--s x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-60 AuthenticAMD GNU/Linux

# cat /etc/make.conf:
CFLAGS="-march=k8 -msse3 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
PORTDIR_OVERLAY="/home/portage"
REPO_NAME="/home/portage"
MAKEOPTS="-j2"
ACCEPT_KEYWORDS=""
USE="alsa arts avi acpi apm berkdb bitmap-fonts cairo cdr cli crypt cups dell djvu -doc dbus dlloader dri dvd dvdr eds elibc_glibc emacs emboss encode esd -fam -firefox fortran fuse flac ffmpeg gdbm gif -gnome gpm gstreamer gtk hal input_devices_evdev input_devices_keyboard input_devices_mouse -ipv6 isdnlog jpeg jpeg2k kerberos kde kernel_linux lm_sensors ldap libg++ motif mysql mad mikmod mp3 mpeg ncurses nforce2 nls nptl nptlonly ogg opengl oss pmu pam pcre pdflib perl png ppds pppd python qt3 qt4 quicktime readline reflection samba sdl session spell spl ssl -sasl svg svga tcpd tiff truetype truetype-fonts type1-fonts udev unicode userland_GNU vorbis win32codecs X xscreensaver -x86 xml xorg xv xcomposite zlib"
FEATURES=""
LINGUAS="us ru"
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="fglrx"

# cat /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/local/share/fonts"
EndSection

Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "dbe"
Load "dri"
Load "freetype"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbLayout" "us,ru"
Option "Xkbmodel" "geniuscomfy2"
Option "XkbOptions" "grp:caps_toggle,grp_led:caps"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
#DisplaySize 330 210 # mm
# HorizSync 30-58
# VertRefresh 43-85
Identifier "Monitor0"
VendorName "SEC"
ModelName "3358"
EndSection

Section "Device"
### Available Driver options are:-
### Values: : integer, : float, : "True"/"False",
### : "String", : " Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # []
#Option "SWcursor" # []
#Option "Dac6Bit" # []
#Option "Dac8Bit" # []
#Option "BusType" # []
#Option "CPPIOMode" # []
#Option "CPusecTimeout" #
#Option "AGPMode" #
#Option "AGPFastWrite" # []
#Option "AGPSize" #
#Option "GARTSize" #
#Option "RingSize" #
#Option "BufferSize" #
#Option "EnableDepthMoves" # []
#Option "EnablePageFlip" # []
#Option "NoBackBuffer" # []
#Option "DMAForXv" # []
#Option "FBTexPercent" #
#Option "DepthBits" #
#Option "PCIAPERSize" #
#Option "AccelDFS" # []
#Option "DDCMode" # []
#Option "IgnoreEDID" # []
#Option "DisplayPriority" # []
#Option "PanelSize" # []
#Option "ForceMinDotClock" #
#Option "ColorTiling" # []
#Option "VideoKey" #
#Option "RageTheatreCrystal" #
#Option "RageTheatreTunerPort" #
#Option "RageTheatreCompositePort" #
#Option "RageTheatreSVideoPort" #
#Option "TunerType" #
#Option "RageTheatreMicrocPath" #
#Option "RageTheatreMicrocType" #
#Option "ScalerWidth" #
#Option "RenderAccel" # []
#Option "SubPixelOrder" # []
#Option "ShowCache" # []
#Option "DynamicClocks" # []
#Option "VGAAccess" # []
#Option "ReverseDDC" # []
#Option "LVDSProbePLL" # []
#Option "AccelMethod" #
#Option "DRI" # []
#Option "ConnectorTable" #
#Option "DefaultConnectorTable" # []
#Option "DefaultTMDSPLL" # []
#Option "TVDACLoadDetect" # []
#Option "ForceTVOut" # []
#Option "TVStandard" #
#Option "IgnoreLidStatus" # []
#Option "DefaultTVDACAdj" # []
#Option "Int10" # []
Identifier "Card0"
Driver "radeon"
# Driver "fglrx"
# VendorName "Unknown Vendor"
VendorName "ATI Technologies Inc"
# BoardName "Unknown Board"
BoardName "RS482 [Radeon Xpress 200]"
BusID "PCI:1:5:0"
Option "XAANoOffscreenPixmaps" "true"
EndSection