Не получается загрузится с LiveDVD 2007 [solved]

Проблема следующая:
Пытаюсь загрузится с LiveDVD 2007 генту, да вот бяда...
Что я вижу?!! это приглашение назвать ядро и параметры к нему, все нормально, вводим (gentoo без параметров).
Первое, что я появляется на экране это строки:

hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.
hdc: drive not ready for command
hdc: drive not ready for command
hdc: drive not ready for command
hdc: drive not ready for command
hdc: drive not ready for command
hdc: drive not ready for command
hdc: drive not ready for command
hdc: drive not ready for command

Дальше он грузит модули, активирует mdev, создает tmpfs для /newroot. А на попытке смонтировать /dev/hdb он завизает намертво (курсор моргает :-) ) выручает тока резет.

Значит в режиме debug мне выдает следующее

ICH5: chipset revision 2
ICH5: 100% native mode on irq 16
        ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda: pio, hdb:DMA
        ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hdb: SAMSUNG SP0802N, ATA DISK drive
ide0 at 0xeff0-0xeff7,0xefe6 on irq 16
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive
...
hdc: cdrom_pc_intr:  The drive appears confused (ireason = 0x01). Trying to recover by ending request.
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: drive not ready for command
hdc: ATAPI CD-ROM drive, 0kB Cache, UDMA(33) // 
Uniform CD-ROM driver Revision: 3.20
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: drive not ready for commandhdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: drive not ready for commandhdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: drive not ready for command

P.S. DMA отрубал (gentoo ide=nodma) не помогло (
Пробывал acpi=off all-generic-ide irqpoll помогло лишь частично.
раскладку выбрал )))
Прошел следующие пункты:
Keeping default keymap
Determining rood device....
Determining looptyp ...
Copying read-write image contents to tmpfs (Вот тут виснет)

Что делать подскажите...