AlSA и EMU 0404

lspci определяет карту как аудигу 2, соответственно emu10k1,однако ни включение ее в ядро, ни установка alsa-driver отдельно не помогают, микшер не запускаеться.
При включении в ядро alsaconf пишет :
Запускаем modules-update...
* Please run 'update-modules' from now on; 'modules-update' is going away
Loading driver...
* Loading ALSA modules ...
* Loading: snd-card-0 ...
WARNING: Error inserting snd (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd.ko): Invalid module format
WARNING: Error inserting snd_hwdep (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd-hwdep.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_util_mem (/lib/modules/2.6.20-gentoo-r8/alsa-driver/synth/snd-util-mem.ko): Invalid module format
WARNING: Error inserting snd_page_alloc (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd-page-alloc.ko): Invalid module format
WARNING: Error inserting snd_timer (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting ac97_bus (/lib/modules/2.6.20-gentoo-r8/alsa-driver/misc/ac97_bus.ko): Invalid module format
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.20-gentoo-r8/alsa-driver/pci/ac97/snd-ac97-codec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_emu10k1 (/lib/modules/2.6.20-gentoo-r8/alsa-driver/pci/emu10k1/snd-emu10k1.ko): Unknown symbol in module, or unknown parameter (see dmesg) [ !! ]
* Loading: snd-seq ...
WARNING: Error inserting snd (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd.ko): Invalid module format
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq (/lib/modules/2.6.20-gentoo-r8/alsa-driver/acore/seq/snd-seq.ko): Unknown symbol in module, or unknown parameter (se [ !! ]
* ERROR: Failed to load necessary drivers [ ok ]
* Restoring Mixer Levels ...
* No mixer config in /var/lib/alsa/asound.state, you have to unmute your card! [ ok ]
Setting default volumes...
amixer: Mixer attach default error: No such device
Сохраняем настройки микшера в /etc/asound.state.
/usr/sbin/alsactl: save_state:1253: No soundcards found...

при alsa-diver отдельно:
Запускаем modules-update...
* Please run 'update-modules' from now on; 'modules-update' is going away
Loading driver...
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-seq ... [ ok ]
* ERROR: Failed to load necessary drivers [ ok ]
* Restoring Mixer Levels ...
* No mixer config in /var/lib/alsa/asound.state, you have to unmute your card! [ ok ]
Setting default volumes...
amixer: Mixer attach default error: No such device
Сохраняем настройки микшера в /etc/asound.state.
/usr/sbin/alsactl: save_state:1253: No soundcards found...

Сторонних дров тоже не нашел.Карта собранны на этом DCP, однако она далеко не аудига.Следует ли это понимать,что в никсах я могу с ней распрощаться?