XSANE
Сканер Canon CanoScan N640P,подключен к пар.порту.
вот /etc/sane.d/dll.conf
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_pp
coolscan
coolscan2
#dc25
#dc210
#dc240
dell1600n_net
dmc
epson
fujitsu
#gphoto2
genesys
gt68xx
hp
hpsj5s
hp3500
hp4200
hp5400
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
#v4l
#
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
А вот /etc/sane.d/canon_pp.conf
# Define which port to use if one isn't specified - you should only have
# one of these lines!
# This is the default port to be used - others will be detected
ieee1284 parport0
# Define the location of our pixel weight file, can begin with ~/ if needed.
# You can have as many of these as you like - lines with ports that don't exist
# will be ignored.
#
# Parameters are:
# calibrate /path/to/calibration-file port-name
#
# The format of port-name is dependant on your OS version.
#
# If a file isn't speficied, the default name will be
# ~/.sane/canon_pp-calibration-[port-name]
calibrate ~/.sane/canon_pp-calibration-pp0 parport0
# calibrate /etc/sane/my_calibration parport1
# Enable the next line if you're having trouble with ECP mode such as I/O
# errors. Nibble mode is slower, but more reliable.
force_nibble
# Set a default initialisation mode for each port. Valid modes are:
# AUTO (attempts to automatically detect by trying both methods)
# FB620P (10101010 style.. also works for FB320P)
FB630P (11001100 style.. also works for FB330P, N340P, N640P)
init_mode AUTO parport0
# init_mode FB620P parport0
init_mode FB630P parport0
Проблема в том,что когда я запускаю xsane то сканер шибуршит,типо определился,но xsane говорит что не найдено устройств.
- Для комментирования войдите или зарегистрируйтесь
Ну помогите кто
Ну помогите кто нить.Сканер нужен по зарез.Он работал точно в никсах.Под MDK и ASP.А тут никак не запуститься
Под рутом
Под рутом пробовал запускать?
Конечно.
Конечно.
Неужели никто
Неужели никто не знает?
а что там
а что там sane-find-scanner пишет? и scanimage -L.
проверь что там в ядре на тему parport и ieee1284
_________________
Gentoo x86_64 2.6.17-r4 на Athlon 64 3000+
Вот sane-find-scanner #
Вот sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# SANE has been built without libusb support. This may be a reason
# for not detecting USB scanners. Read README for more details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Вот sane-find-scanner -p
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# SANE has been built without libusb support. This may be a reason
# for not detecting USB scanners. Read README for more details.
# No Mustek parallel port scanners found. If you expected something
# different, make sure the scanner is correctly connected to your computer
# and you have apropriate access rights.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Вот scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Вот нашел
Вот нашел какую-то статью с упоминанием CanoScan... может поможет (собственно первая при поиске в google :).
Взято отсюда:
Не помогает.При
Не помогает.При любом раскладе пишет
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).