[Решено] Как заставить работать 3G модем ZTE MF192+ (MF652)

Ядро 3.18.6

lsusb 
Bus 001 Device 010: ID 19d2:1218 ZTE WCDMA Technologies MSM MF65

Вывод messages

kernel: usb 1-1: new high-speed USB device number 5 using ehci-pci 
kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1216 
kernel: usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 
kernel: usb 1-1: Product: MF192+ 
kernel: usb 1-1: Manufacturer: ZTE 
kernel: usb 1-1: SerialNumber: 42E621180E4317FEF62E21D98F7AD69103D16078 
kernel: usb-storage 1-1:1.0: USB Mass Storage device detected 
kernel: scsi host4: usb-storage 1-1:1.0 
mtp-probe[5405]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1" 
mtp-probe[5405]: bus: 1, device: 5 was not an MTP device 
kernel: scsi 4:0:0:0: CD-ROM            ZTE      Datacard CD-ROM  0001 PQ: 0 ANSI: 0 
kernel: scsi 4:0:0:0: Attached scsi generic sg1 type 5 
usb_modeswitch[5442]: switch device 19d2:1216 on 001/005 
kernel: usb 1-1: USB disconnect, device number 5 
cron[5467]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons) 
kernel: usb 1-1: new high-speed USB device number 6 using ehci-pci 
kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1218 
kernel: usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 
kernel: usb 1-1: Product: MF192+ 
kernel: usb 1-1: Manufacturer: ZTE 
kernel: usb 1-1: SerialNumber: 42E621180E4317FEF62E21D98F7AD69103D16078 
kernel: cdc_acm 1-1:1.1: ttyACM0: USB ACM device
kernel: cdc_acm 1-1:1.3: ttyACM1: USB ACM device 
kernel: cdc_acm 1-1:1.5: ttyACM2: USB ACM device 
kernel: cdc_acm 1-1:1.7: ttyACM3: USB ACM device 
kernel: usb-storage 1-1:1.9: USB Mass Storage device detected 
kernel: scsi host5: usb-storage 1-1:1.9 
root[5527]: usb_modeswitch: switched to 19d2:1218 on 001/006 
kernel: scsi 5:0:0:0: CD-ROM            ZTE      Datacard CD-ROM  0001 PQ: 0 ANSI: 0 
kernel: scsi 5:0:0:0: Attached scsi generic sg1 type 5 
mtp-probe[5563]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1" 
mtp-probe[5563]: bus: 1, device: 6 was not an MTP device 
ModemManager[4049]: <info>  Creating modem with plugin 'ZTE' and '4' ports 
ModemManager[4049]: <warn>  Could not grab port (tty/ttyACM2): 'Cannot add port 'tty/ttyACM2', unhandled serial type' 
ModemManager[4049]: <info>  Modem for device at '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1' successfully created 
ModemManager[4049]: <warn>  Modem couldn't be initialized: couldn't load current capabilities: Failed to determine modem capabilities. 
NetworkManager[4036]: <info>  (ttyACM3): new Broadband device (carrier: UNKNOWN, driver: 'cdc_acm', ifindex: 0) 
NetworkManager[4036]: <info>  (ttyACM3): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] 
NetworkManager[4036]: <info>  (ttyACM3): modem state 'unknown'

nm-applet указывает на появление поддержки мобильной сети, но пишет, что недоступно