настойка ADSL (D-LINK-200, webplus, spb)

scion 6 марта, 2006 - 13:19

Общие вопросы

вот, пытаюсь настроить ADSL сил, больше нет... незнаю что и делать... Вроде все настроил но при попытке:
#./eciadsl-start

[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is OK
./eciadsl-start: line 326: lspci: command not found
./eciadsl-start: line 369: lspci: command not found

[EciAdsl 2/5] Uploading firmware...

Process skipped .. no more needed
firmware loaded successfully

[EciAdsl 3/5] Synchronization...

OK eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

Connection successful

[EciAdsl 5/5] Setting up route table...

Waiting for tap0...
Adding default route... default route added: tap0

и не обна страница не открывается... :-(
Посоветуйте что-нибудь!

остальные настройки:

#lsusb
Bus 002 Device 002: ID 2001:5100 D-Link Corp. [hex]
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:000

# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:156 errors:0 dropped:0 overruns:0 frame:0
TX packets:156 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9812 (9.5 Kb) TX bytes:9812 (9.5 Kb)

tap0 Link encap:Ethernet HWaddr DE:6B:50:5C:38:5C
inet addr:195.131.217.70 Bcast:195.131.217.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 b) TX bytes:2016 (1.9 Kb)

#./eciadsl-doctor
You are using linux kernel version 2.6.12-gentoo-r6
wc: /var/log/messages: No such file or directory
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
UHCI support is not needed
OHCI support is missing... trying to load
OHCI support is now OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
Loading EZ-USB firmware...
Process skipped .. no more needed
Loading the GlobeSpan firmware...
OK eciadsl-synch: success
You are using pppd version 2.4.2 (untested)
You have an /etc/ppp/options file. Options in this file may conflict with
options from /etc/ppp/peers/adsl. We suggest to remove this file or make a
backup copy.
No existing PPP connection... trying to make one (please wait)
nice: `--20' option is obsolete; use `-n -20' since this will be removed in the future
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Modem hangup
Connection terminated.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5703), status = 0x0
Modem hangup
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5719), status = 0x0
Modem hangup
Connection terminated.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5730), status = 0x0
Modem hangup
Connection terminated.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5744), status = 0x0
Modem hangup
Connection terminated.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5758), status = 0x0
Modem hangup
Connection terminated.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5774), status = 0x0
Modem hangup
Connection terminated.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5789), status = 0x0
Modem hangup
Connection terminated.
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5803), status = 0x0
Modem hangup
Connection terminated.
using channel 10
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5817), status = 0x0
Modem hangup
Connection terminated.
Waiting for 1 child processes...
script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS, pid 5831
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5831), status = 0x0
PPP: very bad ... usermode driver just crashed
tail: `+' option is obsolete; use `-n (null)' since this will be removed in the future
tail: cannot open `/var/log/messages' for reading: No such file or directory

#cat /etc/eciadsl/eciadsl.conf
VID1=2001
PID1=5100
VID2=2001
PID2=5100
MODE=LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
VCI=33
VPI=0
FIRMWARE=/etc/eciadsl/firmware00.bin
SYNCH=/etc/eciadsl/gs7470_synch06.bin
PPPD_USER=
PPPD_PASSWD=
USE_DHCP=no
USE_STATICIP=yes
STATICIP=195.131.217.70
GATEWAY=195.131.217.1
MODEM=D-Link DSL200 rev B1
MODEM_CHIPSET=GS7470
SYNCH_ALTIFACE=5
PPPOECI_ALTIFACE=1
PROVIDER=Other
DNS1=194.8.160.90
DNS2=195.131.52.130