Настройка VPN (pptp)

Доброго времени суток всем!
Возникла такая проблема. Настроил VPN как сказано тут. Однако при запуске:
/etc/init.d/net.ppp0 start
выдает:

 * Bringing up interface ppp0
 *   Starting pppd in ppp0 ...                                                                                                                                        [ ok ]
 *   Backgrounding ...
 * WARNING: net.ppp0 has started, but is inactive

Но не подключает: ifconfig -a

eth0      Link encap:Ethernet  HWaddr b8:ac:6f:78:82:c3  
          inet addr:192.168.0.77  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe78:82c3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:174433 errors:0 dropped:0 overruns:0 frame:0
          TX packets:112264 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:147140588 (140.3 MiB)  TX bytes:13045339 (12.4 MiB)
          Interrupt:47 Base address:0xe000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1744 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1744 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:141890 (138.5 KiB)  TX bytes:141890 (138.5 KiB)

ppp0      Link encap:Point-to-Point Protocol  
          POINTOPOINT NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3 
          RX bytes:100 (100.0 B)  TX bytes:0 (0.0 B)

Вот, что в /etc/conf.d/net:

config_eth0=( "192.168.0.77 netmask 255.255.255.0 brd 192.168.0.255" )
routes_eth0=( "default gw 192.168.0.1" )

config_ppp0=( "ppp" )
link_ppp0="pty 'pptp 123.123.123.123 --nolaunchpppd --nobuffer'"
username_ppp0='login_here'
password_ppp0='passwd_here'

pppd_ppp0=(
        debug
        lock
        nodeflate
        defaultroute
        nobsdcomp
        require-mppe-128
        require-mschap-v2
        refuse-eap
        persist
        noauth
        logfile /var/log/pptp-client.log
)

depend_ppp0() {
        need net.eth0
}

На сколько я понимаю, это официальный способ. Что может быть не так?
Заранее спасибо за помощь!

Все нормально. Просто rc не

что в /var/log/messages на счет pppd?

Вот вывод в

Вот вывод в /var/log/messages:

Oct 19 11:00:16 localhost pppd[19433]: Plugin passwordfd.so loaded.
Oct 19 11:00:16 localhost pppd[19434]: pppd 2.4.5 started by n0rt0n, uid 0
Oct 19 11:00:16 localhost pppd[19434]: using channel 35
Oct 19 11:00:16 localhost pppd[19434]: Using interface ppp0
Oct 19 11:00:16 localhost /etc/init.d/net.ppp0[19366]: WARNING: net.ppp0 has started, but is inactive
Oct 19 11:00:16 localhost pppd[19434]: Connect: ppp0 <--> /dev/pts/0
Oct 19 11:00:16 localhost pptp[19437]: anon log[main:pptp.c:310]: The synchronous pptp option is NOT activated
Oct 19 11:00:16 localhost pptp[19442]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'
Oct 19 11:00:16 localhost pptp[19442]: anon log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply
Oct 19 11:00:16 localhost pptp[19442]: anon log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established.
Oct 19 11:00:17 localhost pppd[19434]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xeed67638> <pcomp> <accomp>]
Oct 19 11:00:17 localhost pptp[19442]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'
Oct 19 11:00:17 localhost pptp[19442]: anon log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply.
Oct 19 11:00:17 localhost pptp[19442]: anon log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 56064).
Oct 19 11:00:17 localhost pppd[19434]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x53c11a02> <pcomp> <accomp>]
Oct 19 11:00:17 localhost pppd[19434]: sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x53c11a02> <pcomp> <accomp>]
Oct 19 11:00:17 localhost pppd[19434]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xeed67638> <pcomp> <accomp>]
Oct 19 11:00:17 localhost pppd[19434]: rcvd [CHAP Challenge id=0x25 <6b50b95c569247bedc324d810f99fa74>, name = "pptpd"]
Oct 19 11:00:17 localhost pppd[19434]: sent [CHAP Response id=0x25 <3268c8e52d02bd67ec0b36528b83a28d000000000000000016dc34400fbd6597c1c6b8af79a6e6cda6942bfeceba269a00>, name = "mylogin"]
Oct 19 11:00:17 localhost pptp[19437]: anon log[decaps_gre:pptp_gre.c:414]: accepting packet 4 (expecting 3, lost or reordered)
Oct 19 11:00:17 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:17 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:17 localhost pptp[19437]: anon log[decaps_gre:pptp_gre.c:405]: discarding duplicate or old packet 3 (expecting 5)
Oct 19 11:00:20 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:20 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:23 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:23 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:26 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:26 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:29 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:29 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:32 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:32 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:35 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:35 localhost pppd[19434]: discarding proto 0x80fd in phase 5
Oct 19 11:00:38 localhost pppd[19434]: rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
Oct 19 11:00:38 localhost pppd[19434]: discarding proto 0x80fd in phase 5

На той стороне, кроме mschap

На той стороне, кроме mschap encryption, еще просят mschap compression (MPPC).

Не грусти, товарищ! Всё хорошо, beautiful good!

хмм, странно, я думал строчка

хмм, странно, я думал строчка require-mppe-128 как раз включает mppe-mppc. Разве не так?

Нет, не включает

Нет, не включает

Не грусти, товарищ! Всё хорошо, beautiful good!

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".