motion + orient SDVR-405 [SOLVED]

Всем доброго времени суток!
Никак не могу запустить сей девайс, максимум чего добился это синий фон и часы в углу картинки (motion работает, но сигнала как будто нет). Помогите пожалуйста!

вот /var/log/messages

Jan 28 03:21:34 localhost motion: [0] Processing thread 0 - config file /etc/motion.conf
Jan 28 03:21:34 localhost motion: [0] Motion 3.2.11.1 Started
Jan 28 03:21:34 localhost motion: [0] ffmpeg LIBAVCODEC_BUILD 3417345 LIBAVFORMAT_BUILD 3417858
Jan 28 03:21:34 localhost motion: [0] Thread 1 is from /etc/motion.conf
Jan 28 03:21:34 localhost motion: [1] cap.driver: "bttv"
Jan 28 03:21:34 localhost motion: [1] cap.card: "BT878 video (ProVideo PV143)"
Jan 28 03:21:34 localhost motion: [1] cap.bus_info: "PCI:0000:05:01.0"
Jan 28 03:21:34 localhost motion: [1] cap.capabilities=0x05000015
Jan 28 03:21:34 localhost motion: [1] - VIDEO_CAPTURE
Jan 28 03:21:34 localhost motion: [1] - VIDEO_OVERLAY
Jan 28 03:21:34 localhost motion: [1] - VBI_CAPTURE
Jan 28 03:21:34 localhost motion: [1] - READWRITE
Jan 28 03:21:34 localhost motion: [1] - STREAMING
Jan 28 03:21:34 localhost motion: [1] Supported palettes:
Jan 28 03:21:34 localhost motion: [1] 0: GREY (8 bpp, gray)
Jan 28 03:21:34 localhost motion: [1] 1: HI24 (8 bpp, dithered color)
Jan 28 03:21:34 localhost motion: [1] 2: RGBO (15 bpp RGB, le)
Jan 28 03:21:34 localhost motion: [1] 3: RGBQ (15 bpp RGB, be)
Jan 28 03:21:34 localhost motion: [1] 4: RGBP (16 bpp RGB, le)
Jan 28 03:21:34 localhost motion: [1] 5: RGBR (16 bpp RGB, be)
Jan 28 03:21:34 localhost motion: [1] 6: BGR3 (24 bpp RGB, le)
Jan 28 03:21:34 localhost motion: [1] 7: BGR4 (32 bpp RGB, le)
Jan 28 03:21:34 localhost motion: [1] 8: RGB4 (32 bpp RGB, be)
Jan 28 03:21:34 localhost motion: [1] 9: YUYV (4:2:2, packed, YUYV)
Jan 28 03:21:34 localhost motion: [1] 10: YUYV (4:2:2, packed, YUYV)
Jan 28 03:21:34 localhost motion: [1] 11: UYVY (4:2:2, packed, UYVY)
Jan 28 03:21:34 localhost motion: [1] 12: 422P (4:2:2, planar, Y-Cb-Cr)
Jan 28 03:21:34 localhost motion: [1] 13: YU12 (4:2:0, planar, Y-Cb-Cr)
Jan 28 03:21:34 localhost motion: [1] Selected palette YU12
Jan 28 03:21:34 localhost motion: [1] index_format 8 Test palette YU12 (720x480)
Jan 28 03:21:34 localhost motion: [1] Using palette YU12 (720x480) bytesperlines 720 sizeimage 518400 colorspace 00000000
Jan 28 03:21:34 localhost motion: [1] found control 0x00980900, "Brightness", range 0,65535 
Jan 28 03:21:34 localhost motion: [1] 	"Brightness", default 32768, current 32768
Jan 28 03:21:34 localhost motion: [1] found control 0x00980901, "Contrast", range 0,65535 
Jan 28 03:21:34 localhost motion: [1] 	"Contrast", default 32768, current 32768
Jan 28 03:21:34 localhost motion: [1] found control 0x00980902, "Saturation", range 0,65535 
Jan 28 03:21:34 localhost motion: [1] 	"Saturation", default 32768, current 32768
Jan 28 03:21:34 localhost motion: [1] found control 0x00980903, "Hue", range 0,65535 
Jan 28 03:21:34 localhost motion: [1] 	"Hue", default 32768, current 32768
Jan 28 03:21:34 localhost motion: [1] found control 0x00000000, "42", range 0,0 !DISABLED!
Jan 28 03:21:34 localhost motion: [1] 	"42", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x00000000, "42", range 0,0 !DISABLED!
Jan 28 03:21:34 localhost motion: [1] 	"42", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x00000000, "42", range 0,0 !DISABLED!
Jan 28 03:21:34 localhost motion: [1] 	"42", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x00000000, "42", range 0,0 !DISABLED!
Jan 28 03:21:34 localhost motion: [1] 	"42", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x00000000, "42", range 0,0 !DISABLED!
Jan 28 03:21:34 localhost motion: [1] 	"42", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x00000000, "42", range 0,0 !DISABLED!
Jan 28 03:21:34 localhost motion: [1] 	"42", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x08000000, "chroma agc", range 0,1 
Jan 28 03:21:34 localhost motion: [1] 	"chroma agc", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] found control 0x08000001, "combfilter", range 0,1 
Jan 28 03:21:34 localhost motion: [1] 	"combfilter", default 0, current 0
Jan 28 03:21:34 localhost motion: [1] Resizing pre_capture buffer to 1 items

Ядро [2] linux-2.6.31-gentoo-r6 *

localhost log # cat /usr/src/linux/.config|grep V4L
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_V4L_USB_DRIVERS=y

модуль загружаю с такими параметрами

localhost log # cat /etc/modprobe.d/video4linux.conf 
options bttv card=0x69 tuner=-1 autoload=0 
localhost log # lsmod |grep bttv
bttv                  105604  0 
ir_common              48076  1 bttv
i2c_algo_bit            4984  1 bttv
videobuf_dma_sg        11316  1 bttv
videobuf_core          16332  2 bttv,videobuf_dma_sg
btcx_risc               4368  1 bttv
tveeprom               10720  1 bttv
### v4l2 device info [/dev/video0] ###
general info
    VIDIOC_QUERYCAP
	driver                  : "bttv"
	card                    : "BT878 video (ProVideo PV143)"
	bus_info                : "PCI:0000:05:01.0"
	version                 : 0.9.18
	capabilities            : 0x5000015 [VIDEO_CAPTURE,VIDEO_OVERLAY,VBI_CAPTURE,READWRITE,STREAMING]

в общем все как в http://avreg.net/howto_linux-capture-cards.html
что мог забыть? (

/etc/modprobe.d/motion.conf

/etc/modprobe.d/motion.conf

alias char-major-81 bttv
options bttv card=103

Вот и все. Для SDVR405 номер карты 103.

теперь возник организационный вопрос

А как теперь заставить motion смотреть разные камеры при том что чип bttv всего 1, входа 4?
в /dev лишь video0
но камеру 1 он видит четко

судя по документации

судя по документации выше:
options bttv card=103,103,103,103

просмотр с нескольких камер на одной плате захвата

в каждом треде motion нужно найти параметр input, который принимает значение 0..1..2.....7
и указать корректное значение. Значение получить просмотром каналов платы например с помощью xawtv, попробуйте там разные composite0.. s-video, television, что будет зависеть от типа платы.

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".