Не могу подключить сканер Mustek 1200CU+ [SOLVED]

Собственно сабж в топике.
Проблема в том, что ни xsane ни sane не видят его.
Закинул драйвер с диска куда и положено /usr/share/sane/gt68xx/PS1Dfw.usb

ядро собирал сам, 2.6.30.3 с kernel.org

Далее несколько строк для более глубокого дебага.

># sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.
  # SANE has been built without libusb support. This may be a reason
  # for not detecting USB scanners. Read README for more details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

># lsusb
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 003: ID 0408:030c Quanta Computer, Inc.
Bus 002 Device 001: ID 1d6b:0002
Bus 005 Device 008: ID 055f:021c Mustek Systems, Inc. BearPaw 1200 CU Plus
Bus 005 Device 002: ID 09da:000a A4 Tech Co., Ltd
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 002: ID 08ff:2580 AuthenTec, Inc.
Bus 006 Device 001: ID 1d6b:0001
Bus 007 Device 003: ID 03f0:171d Hewlett-Packard
Bus 007 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 001 Device 001: ID 1d6b:0002

># cat /etc/sane.d/mustek_usb.conf                    
...
# Autodetect 1200 CU Plus
usb 0x055f 0x0008
...

># scanimage -L
device `v4l:/dev/video0' is a Noname HP Webcam virtual device

Надеюсь на Вашу помощь. Заранее благодарен.