Marvell Yukon: sky2 driver vlan problem

Возникает проблема при при добавлении влана на интерфейс , без влана работает нормально

stp ~ # dmesg | grep sky2
[    0.556225] sky2 driver version 1.22
[    0.556322] sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.556395] sky2 0000:02:00.0: setting latency timer to 64
[    0.556453] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[    0.588628] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
[    0.588779] sky2 0000:02:00.0: irq 2300 for MSI/MSI-X
[    0.589195] sky2 eth0: addr 00:17:31:7c:b9:0e
[   33.124270] sky2 eth0: enabling interface
[   34.808220] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[  200.941020] sky2 eth0: disabling interface
[  201.400026] sky2 eth0: enabling interface
[  203.084006] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[  209.180001] sky2 eth0: rx length error: status 0x3c2300 length 60
[  211.269464] sky2 eth0: rx length error: status 0x3c2300 length 60
[  212.029596] sky2 eth0: rx length error: status 0x3c2100 length 60
[  216.055062] sky2 eth0: rx length error: status 0x3c2300 length 60
[  216.473475] sky2 eth0: rx length error: status 0x3c2300 length 60
[  217.034967] sky2 eth0: rx length error: status 0x622100 length 98
[  217.723090] sky2 eth0: rx length error: status 0x3c2300 length 60
[  218.585024] sky2 eth0: rx length error: status 0x3c2300 length 60
[  219.036486] sky2 eth0: rx length error: status 0x622100 length 98
[  220.035743] sky2 eth0: rx length error: status 0x622100 length 98
[  221.039842] sky2 eth0: rx length error: status 0x622100 length 98
[  222.035859] sky2 eth0: rx length error: status 0x622100 length 98
[  222.647132] sky2 eth0: rx length error: status 0x3c2300 length 60
[  223.035768] sky2 eth0: rx length error: status 0x622100 length 98
[  224.035912] sky2 eth0: rx length error: status 0x622100 length 98
[  225.035765] sky2 eth0: rx length error: status 0x622100 length 98
[  226.035780] sky2 eth0: rx length error: status 0x622100 length 98
[  227.035886] sky2 eth0: rx length error: status 0x622100 length 98
[  227.916355] sky2 eth0: rx length error: status 0x3c2300 length 60
[  228.035714] sky2 eth0: rx length error: status 0x622100 length 98
[  229.035750] sky2 eth0: rx length error: status 0x622100 length 98
[  229.961138] sky2 eth0: rx length error: status 0x3c2300 length 60
[  230.035763] sky2 eth0: rx length error: status 0x622100 length 98
[  230.703614] sky2 eth0: rx length error: status 0x3c2300 length 60
[  231.171993] sky2 eth0: rx length error: status 0x3c2300 length 60
[  233.699828] sky2 eth0: rx length error: status 0x3c2300 length 60
[  233.931950] sky2 eth0: rx length error: status 0x3c2300 length 60
[  238.575331] sky2 eth0: rx length error: status 0x3c2300 length 60
[  239.044635] sky2 eth0: rx length error: status 0x3c2300 length 60
[  244.882791] sky2 eth0: rx length error: status 0x3c2300 length 60
[  245.095271] sky2 eth0: disabling interface
[  245.562912] sky2 eth0: enabling interface
[  247.254399] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both

потери жуткие идут если влан поднят.