gentoo 2008 minimal cd и Kde
как установить кде?
ставлю так... не выходит
http://gentoo-wiki.com/HOWTO_KDE_Desktop_for_the_end-user
всё дошло до установки kdenetwork-3.5.9
вот что в консоль летит...
# emerge kde
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 7) kde-base/kdenetwork-3.5.9 to /
* kdenetwork-3.5-patchset-01.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* kdenetwork-3.5.9.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking kdenetwork-3.5.9.tar.bz2 ;-) ... [ ok ]
* checking kdenetwork-3.5-patchset-01.tar.bz2 ;-) ... [ ok ]
* To support Video4Linux webcams in this package is required to have
* x11-libs/qt:3 compiled with OpenGL support.
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* ERROR: kde-base/kdenetwork-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* kdenetwork-3.5.9.ebuild, line 61: Called die
* The specific snippet of code:
* die "Please reemerge x11-libs/qt:3 with USE=\"opengl\"."
* The die message:
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/die.env'.
*
* Messages for package kde-base/kdenetwork-3.5.9:
* To support Video4Linux webcams in this package is required to have
* x11-libs/qt:3 compiled with OpenGL support.
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* ERROR: kde-base/kdenetwork-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* kdenetwork-3.5.9.ebuild, line 61: Called die
* The specific snippet of code:
* die "Please reemerge x11-libs/qt:3 with USE=\"opengl\"."
* The die message:
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/die.env'.
*
#
что делать? как быть :(
- Для комментирования войдите или зарегистрируйтесь
Добавить
Добавить глобальный USE-флаг opengl
пересобрать qt, потом kde
#emerge x11-libs/qt:3
#emerge x11-libs/qt:3 --unmerge
#USE=opengl
#emerge x11-libs/qt:3
# emerge kde
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 7) kde-base/kdenetwork-3.5.9 to /
* kdenetwork-3.5-patchset-01.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* kdenetwork-3.5.9.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking kdenetwork-3.5.9.tar.bz2 ;-) ... [ ok ]
* checking kdenetwork-3.5-patchset-01.tar.bz2 ;-) ... [ ok ]
* To support Video4Linux webcams in this package is required to have
* x11-libs/qt:3 compiled with OpenGL support.
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* ERROR: kde-base/kdenetwork-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* kdenetwork-3.5.9.ebuild, line 61: Called die
* The specific snippet of code:
* die "Please reemerge x11-libs/qt:3 with USE=\"opengl\"."
* The die message:
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/die.env'.
*
* Messages for package kde-base/kdenetwork-3.5.9:
* To support Video4Linux webcams in this package is required to have
* x11-libs/qt:3 compiled with OpenGL support.
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* ERROR: kde-base/kdenetwork-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* kdenetwork-3.5.9.ebuild, line 61: Called die
* The specific snippet of code:
* die "Please reemerge x11-libs/qt:3 with USE=\"opengl\"."
* The die message:
* Please reemerge x11-libs/qt:3 with USE="opengl".
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/die.env'.
*
#
сопсна ничего не поменялось :(
у меня видеокарта встроенная, на чипсете VIA... камень Athlon64x2 3800+
это так к сведению.........
а ниче не
а ниче не поменялось, потому как вы чето не то сделали. В make.conf в секцию use добавить флаг opengl, далее сделать emerge -uND world и далее преспокойно ставить кде.
ок, щяс
ок, щяс попробую
USE=opengl emerge -uDN kde
Сабж.
Добавь в make.conf как тебе говорили
не помогло
не помогло :(
#emerge kde
....
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/kde-base/kdenetwork-3.5.9/work/kdenetwork-3.5.9/config.log
*
* ERROR: kde-base/kdenetwork-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 4116: Called kde_src_compile
* environment, line 2929: Called kde_src_compile 'src_compile'
* environment, line 3049: Called kde_src_compile 'src_compile' 'all' 'myconf'
* environment, line 3036: Called econf 'configure' 'make' '--with-libidn' '--disable-sametime-plugin' '--disable-slp' '--without-wifi' '--disable-jingle' '--without-xmms' '--without-external-libgadu' '--with-x' '--enable-mitshm' '--without-xinerama' '--with-qt-dir=/usr/qt/3' '--enable-mt' '--with-qt-libraries=/usr/qt/3/lib64' '--disable-dependency-tracking' '--disable-debug' '--without-debug' '--disable-final' '--without-arts' '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man' '--infodir=/usr/kde/3.5/share/info' '--datadir=/usr/kde/3.5/share'
* ebuild.sh, line 513: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/environment'.
*
* Messages for package kde-base/kdenetwork-3.5.9:
*
* ERROR: kde-base/kdenetwork-3.5.9 failed.
* Call stack:
* ebuild.sh, line 49: Called src_compile
* environment, line 4116: Called kde_src_compile
* environment, line 2929: Called kde_src_compile 'src_compile'
* environment, line 3049: Called kde_src_compile 'src_compile' 'all' 'myconf'
* environment, line 3036: Called econf 'configure' 'make' '--with-libidn' '--disable-sametime-plugin' '--disable-slp' '--without-wifi' '--disable-jingle' '--without-xmms' '--without-external-libgadu' '--with-x' '--enable-mitshm' '--without-xinerama' '--with-qt-dir=/usr/qt/3' '--enable-mt' '--with-qt-libraries=/usr/qt/3/lib64' '--disable-dependency-tracking' '--disable-debug' '--without-debug' '--disable-final' '--without-arts' '--prefix=/usr/kde/3.5' '--mandir=/usr/kde/3.5/share/man' '--infodir=/usr/kde/3.5/share/info' '--datadir=/usr/kde/3.5/share'
* ebuild.sh, line 513: Called die
* The specific snippet of code:
* die "econf failed"
* The die message:
* econf failed
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdenetwork-3.5.9/temp/environment'.
*
#
вот мой make.conf
cat /etc/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CFLAGS="-O2 -pipe"
CXXFLAGS="-O2 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
#KDE 14072008
USE="hal kdeenablefinal mmx sse sse2 opengl"
LINGUAS="ru en"
#
может кто нибудь расспишит подробную настройку...? или даст линк на мануал......
bunker пишет: *
Это сделано?
сделано
сделано
Дай 15 строк
Дай 15 строк выше вот этого:
_______________________
From Siberia with Love!
Да уж
Собственно, никто ничего и не поменял. В Настольную Книгу (часть вторая).
Пожалуйста, не описывайте своё железо в подписи
продолжение............
перезагрузил тачку и вот что пишит
# emerge kde
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 4) kde-base/kdeutils-3.5.9-r1 to /
* kdeutils-3.5.9.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* kdeutils-3.5-patchset-02.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ]
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking kdeutils-3.5.9.tar.bz2 ;-) ... [ ok ]
* checking kdeutils-3.5-patchset-02.tar.bz2 ;-) ... [ ok ]
* kgpg needs app-crypt/pinentry built with either the gtk or qt3 USE flag.
* Please enable either USE flag and re-install app-crypt/pinentry.
*
* ERROR: kde-base/kdeutils-3.5.9-r1 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* kdeutils-3.5.9-r1.ebuild, line 42: Called die
* The specific snippet of code:
* die "app-crypt/pinentry needs to be rebuilt with gtk or qt3 support."
* The die message:
* app-crypt/pinentry needs to be rebuilt with gtk or qt3 support.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdeutils-3.5.9-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdeutils-3.5.9-r1/temp/die.env'.
*
* Messages for package kde-base/kdeutils-3.5.9-r1:
* kgpg needs app-crypt/pinentry built with either the gtk or qt3 USE flag.
* Please enable either USE flag and re-install app-crypt/pinentry.
*
* ERROR: kde-base/kdeutils-3.5.9-r1 failed.
* Call stack:
* ebuild.sh, line 49: Called pkg_setup
* kdeutils-3.5.9-r1.ebuild, line 42: Called die
* The specific snippet of code:
* die "app-crypt/pinentry needs to be rebuilt with gtk or qt3 support."
* The die message:
* app-crypt/pinentry needs to be rebuilt with gtk or qt3 support.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/kde-base/kdeutils-3.5.9-r1/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/kde-base/kdeutils-3.5.9-r1/temp/die.env'.
*
#
Ну и чего
Ну и чего непонятного?
"kgpg needs app-crypt/pinentry built with either the gtk or qt3 USE flag"
Пожалуйста, не описывайте своё железо в подписи
сделал и вот что
# emerge kde
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 1) kde-base/kde-3.5.9 to /
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
>>> Unpacking source...
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/kde-base/kde-3.5.9/work ...
>>> Source compiled.
>>> Test phase [not enabled]: kde-base/kde-3.5.9
>>> Install kde-3.5.9 into /var/tmp/portage/kde-base/kde-3.5.9/image/ category kde-base
>>> Completed installing kde-3.5.9 into /var/tmp/portage/kde-base/kde-3.5.9/image/
* checking 0 files for package collisions
>>> Merging kde-base/kde-3.5.9 to /
>>> Safely unmerging already-installed instance...
No package files given... Grabbing a set.
>>> Original instance of package unmerged safely.
>>> kde-base/kde-3.5.9 merged.
>>> No packages selected for removal by clean
>>> Auto-cleaning packages...
>>> No outdated packages were found on your system.
* GNU info directory index is up-to-date.
* IMPORTANT: 13 config files in '/etc' need updating.
* IMPORTANT: 2 config files in '/var/bind' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
unreal ~ # USE="gtk qt3 X" emerge kde
Calculating dependencies... done!
>>> Verifying ebuild Manifests...
>>> Emerging (1 of 1) kde-base/kde-3.5.9 to /
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
>>> Unpacking source...
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/kde-base/kde-3.5.9/work ...
>>> Source compiled.
>>> Test phase [not enabled]: kde-base/kde-3.5.9
>>> Install kde-3.5.9 into /var/tmp/portage/kde-base/kde-3.5.9/image/ category kde-base
>>> Completed installing kde-3.5.9 into /var/tmp/portage/kde-base/kde-3.5.9/image/
* checking 0 files for package collisions
>>> Merging kde-base/kde-3.5.9 to /
>>> Safely unmerging already-installed instance...
No package files given... Grabbing a set.
>>> Original instance of package unmerged safely.
>>> kde-base/kde-3.5.9 merged.
>>> No packages selected for removal by clean
>>> Auto-cleaning packages...
>>> No outdated packages were found on your system.
* GNU info directory index is up-to-date.
* IMPORTANT: 13 config files in '/etc' need updating.
* IMPORTANT: 2 config files in '/var/bind' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
#
Вообще это
Вообще это отсутствие ошибок. Такое тоже бывает (-:Е
Пожалуйста, не описывайте своё железо в подписи
Написано английским же языком
Написано английским же языком: "app-crypt/pinentry нуждается в пересборке с gtk или qt3 поддержкой".
запускаю kdm - в
запускаю kdm - в памяти весит, но не запускается.... что делать? как быть?
поподробнее,
поподробнее, пжлст, что значит "запускаю kdm", откуда, что пишет... насколько я помню, прописывал кдм в /etc/conf.d/xdm
затем /etc/init.d/xdm start
ну или как-то так, подробности в how-to по установке КДЕ...
делаю так как
делаю так как тут
http://gentoo-wiki.com/HOWTO_KDE_Desktop_for_the_end-user
/etc/X11/xorg.conf
покажи /etc/X11/xorg.conf
у меня были похожие симптомы
они лечились коррекцией этого конфига
у меня такого
у меня такого файла вообще нет :(
http://www.gentoo.org/doc/ru/
http://www.gentoo.org/doc/ru/xorg-config.xml
Пожалуйста, не описывайте своё железо в подписи
+100
Жжошь!
Если я
Если я правильно понимаю, вы всю систему загрузившись с лайвсиди и перейдя в новую среду ставите? теперь так можно чтоли?
Всю жизнь считал что после такого перехода надо доставить необходимый минимум и перезагрузиться в реально работающую систему...
система уже
система уже стоит... с лайф сиди я её установил, она запустилась, всё что нужно я поставил
тема ещё актуальна....
сделал всё как тут
http://gentoo-wiki.com/HOWTO_KDE_Desktop_for_the_end-user
при запуске системы всё та же консоль...
ВСЕМ ОГРОМНОЕ
ВСЕМ ОГРОМНОЕ СПАСИБО! Проблема решена!
Поставь SOLVED в теме
Учи английский, RTFM и внимательночитай логи они не просто так пишутся!!!!!!!!!!