Главная » Форум » Gentoo Linux » Ядро Linux и поддержка оборудования

xf86-video-ati + mesa-7.8 = вылеты в kdm

LinAdmin 26 апреля, 2010 - 18:35

Всем привет!
После очередного обновления у меня стали произходить странные вещи.
Что обновлял:
xorg-server-1.7.6
xf86-video-ati-6.13.0
mesa-7.8
После обновления при вводе логина/пароля в kdm начинается загрузка и вместо рабочего стола произходит вылет снова в kdm и так по кругу.
Если после этого попробовать выйти в консоль, то иксы зависают. Если сразу после загрузки kdm не пытаться зайти, а сразу выйти в консоль, то проблем нету.
Проблема решилась только когда откатил mesa до версии 7.5.2.
Видео карта radeon HD3200 (RV600)
Кто нибудь сталкивался с такой проблемой?

‹ uvcvideo [РЕШЕНО] Как отследить активность тачпада ›
»

Нет. HD 3100 Логи иксов?

Автор krigstask, дата создания 26 апреля, 2010 - 21:03.

Нет. HD 3100
Логи иксов? Запуск без kdm?

—

Текстовый редактор vi имеет два режима работы: в первом он пищит, а во втором — всё портит.

»

В логах все чисто, как буд-то

Автор LinAdmin, дата создания 26 апреля, 2010 - 21:10.

В логах все чисто, как буд-то нормальный запуск.
без kdm не проверял, завтра обязательно протестирую.
Кстати версия kdm последняя доступная на сегодня.

—

Если ничего не помогает, прочти наконец инструкцию...

»

В общем не грузятся иксы с

Автор LinAdmin, дата создания 27 апреля, 2010 - 19:02.

В общем не грузятся иксы с MesaLib-7.8.1 даже под рутом.
Вот лог иксов:

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r10_SUPER x86_64 
Current Operating System: Linux SUPER 2.6.31-gentoo-r10_SUPER #1 SMP Sun Apr 11 02:53:51 GMT 2010 x86_64
Kernel command line: root=/dev/sda3
Build Date: 23 April 2010  04:03:29AM
 
Current version of pixman: 0.17.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 27 21:38:09 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "BenQ"
(**) |   |-->Device "RADEON"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard1
(II) Loader magic: 0x7be720
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:5:0) 1002:9610:1458:d000 ATI Technologies Inc Radeon HD 3200 Graphics rev 0, Mem @ 0xd0000000/268435456, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 6.13.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
	ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
	CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
	CEDAR
(II) Primary Device is: PCI 01@00:05:0
(II) [KMS] drm report modesetting isn't supported.
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) RADEON(0): TOTO SAYS 00000000fdfe0000
(II) RADEON(0): MMIO registers at 0x00000000fdfe0000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9610)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
	SubsystemVendorID: 0x1002 SubsystemID: 0x1002
	IOBaseAddress: 0xee00
	Filename: MA78M_S2H_DV
	BIOS Bootup Message: 
B27722 RS780 DDR2 200e/500m                                                 

(II) RADEON(0): Framebuffer space used by Firmware (kb): 16
(II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffc000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=90000 max=120000; xclk=40000
(II) RADEON(0): Output VGA-0 using monitor section BenQ
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_KLDSCP_DAC1
  DDC reg: 0x7e40
(II) RADEON(0): Port1:
  XRANDR name: DVI-0
  Connector: DVI-D
  DFP1: INTERNAL_KLDSCP_LVTMA
  DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:DDC control interface" registered at address 0x6E.
(II) RADEON(0): EDID vendor "BNQ", prod id 30752
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
(II) RADEON(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 7820  Serial#: 21573
(II) RADEON(0): Year: 2009  Week: 38
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite  SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 48  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
(II) RADEON(0): blueX: 0.143 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
(II) RADEON(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
(II) RADEON(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) RADEON(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
(II) RADEON(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEON(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEON(0): Serial No: A9902991SL0
(II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 170 MHz
(II) RADEON(0): Monitor name: BenQ G2220HD
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0009d1207845540000
(II) RADEON(0): 	261301030e301b782e3581a656489a24
(II) RADEON(0): 	125054a56b80710081c081408180a9c0
(II) RADEON(0): 	b300d1c00101023a801871382d40582c
(II) RADEON(0): 	4500dd0c1100001e000000ff00413939
(II) RADEON(0): 	3032393931534c300a0a000000fd0032
(II) RADEON(0): 	4c185311000a202020202020000000fc
(II) RADEON(0): 	0042656e5120473232323048440a0053
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
finished output detect: 1
finished all detect
(II) RADEON(0): EDID vendor "BNQ", prod id 30752
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
(II) RADEON(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ  Model: 7820  Serial#: 21573
(II) RADEON(0): Year: 2009  Week: 38
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync:  Separate  Composite  SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 48  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
(II) RADEON(0): blueX: 0.143 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x864@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
(II) RADEON(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): #4: hsize: 1600  vsize 900  refresh: 60  vid: 49321
(II) RADEON(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) RADEON(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
(II) RADEON(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEON(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEON(0): Serial No: A9902991SL0
(II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 170 MHz
(II) RADEON(0): Monitor name: BenQ G2220HD
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0009d1207845540000
(II) RADEON(0): 	261301030e301b782e3581a656489a24
(II) RADEON(0): 	125054a56b80710081c081408180a9c0
(II) RADEON(0): 	b300d1c00101023a801871382d40582c
(II) RADEON(0): 	4500dd0c1100001e000000ff00413939
(II) RADEON(0): 	3032393931534c300a0a000000fd0032
(II) RADEON(0): 	4c185311000a202020202020000000fc
(II) RADEON(0): 	0042656e5120473232323048440a0053
(II) RADEON(0): EDID vendor "BNQ", prod id 30752
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1920x1080
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(**) RADEON(0): Display dimensions: (480, 270) mm
(**) RADEON(0): DPI set to (101, 180)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.5.0
	ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x20000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00f00000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00f04000
(II) RADEON(0): Will use 15360 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 15360 kb for back buffer at offset 0x00f08000
(II) RADEON(0): Will use 15360 kb for depth buffer at offset 0x01e08000
(II) RADEON(0): Will use 107520 kb for textures at offset 0x02d08000
(II) RADEON(0): Will use 108448 kb for X Server offscreen at offset 0x09608000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x1158b900
(II) RADEON(0): [pci] ring handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring mapped at 0x7fd093032000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x2b800000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7fd093156000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1b800000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7fd07e37b000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1b801000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7fd07c6fb000
(II) RADEON(0): [drm] register handle = 0x2fff8000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 18
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x00df00c0 is: 0x00df00c0
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 111050752 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1920x1080 - 2200 1125 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00030000
Picked PLL 0
before 14850
after 14850
best_freq: 148570
best_feedback_div: 166
best_frac_feedback_div: 0
best_ref_div: 2
best_post_div: 8
(II) RADEON(0): crtc(0) Clock: mode 148500, PLL 1485700
(II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0xA6(166), fracfbdiv 0, pdiv 8
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Output CRT1 enable success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib64/dri/r600_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 508 x 285
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(EE) Mouse1: No device specified.
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Mouse1"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device MLK Defender 2.4GHz mouse
(**) MLK Defender 2.4GHz mouse: always reports core events
(**) MLK Defender 2.4GHz mouse: Device: "/dev/input/event4"
(II) MLK Defender 2.4GHz mouse: Found 9 mouse buttons
(II) MLK Defender 2.4GHz mouse: Found scroll wheel(s)
(II) MLK Defender 2.4GHz mouse: Found relative axes
(II) MLK Defender 2.4GHz mouse: Found x and y relative axes
(II) MLK Defender 2.4GHz mouse: Found absolute axes
(II) MLK Defender 2.4GHz mouse: Found keys
(II) MLK Defender 2.4GHz mouse: Configuring as mouse
(II) MLK Defender 2.4GHz mouse: Configuring as keyboard
(**) MLK Defender 2.4GHz mouse: YAxisMapping: buttons 4 and 5
(**) MLK Defender 2.4GHz mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "MLK Defender 2.4GHz mouse" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) MLK Defender 2.4GHz mouse: (accel) keeping acceleration scheme 1
(**) MLK Defender 2.4GHz mouse: (accel) acceleration profile 0
(II) MLK Defender 2.4GHz mouse: initialized for relative axes.
(WW) MLK Defender 2.4GHz mouse: ignoring absolute axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) MLK Defender 2.4GHz mouse: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x00df00c0 0x00df00c0
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00000000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0x2b7ff000 at 0x7fd093157000
(II) RADEON(0): [drm] Closed DRM master.
—

Если ничего не помогает, прочти наконец инструкцию...

»

Рекомендую посмотреть в

Автор eegorov, дата создания 28 апреля, 2010 - 07:28.

Рекомендую посмотреть в сторону
[KMS] drm report modesetting isn't supported

»

Что-то нету у меня в ядре

Автор LinAdmin, дата создания 28 апреля, 2010 - 09:51.

Что-то нету у меня в ядре такого.
Версия ядра 2.6.31-r10.

—

Если ничего не помогает, прочти наконец инструкцию...

»

А ядро тоже надо бы обновить,

Автор krigstask, дата создания 28 апреля, 2010 - 10:37.

А ядро тоже надо бы обновить, лучше до .33

—

Текстовый редактор vi имеет два режима работы: в первом он пищит, а во втором — всё портит.

»

Все нашел, спасибо! Для KMS

Автор LinAdmin, дата создания 29 апреля, 2010 - 22:08.

Все нашел, спасибо!
Для KMS лучше использовать ядро 2.6.33+
Вот хороший мануал: http://en.gentoo-wiki.com/wiki/Radeon

—

Если ничего не помогает, прочти наконец инструкцию...

»

Обновил ядро до версии

Автор LinAdmin, дата создания 30 апреля, 2010 - 22:04.

Обновил ядро до версии 2.6.33-r1 а так же mesa до версии 7.8.1, так же пересобрал xf86-video-ati и libdrm-2.4.20 на всякий случай.
Иксы загружаются и все работает, правда иногда выступают артефакты. Если одно окно частично покрывает другое, то при закрытии активного его часть остается на неактивном. Если обновить окно, то артефакты пропадают. Чем это вызванно и от чего зависит, мне так и не удалось понять. Настраивал так же как написано в руководстве ссылкой выше. Все firmware установил.
ЧЯДНТ?

—

Если ничего не помогает, прочти наконец инструкцию...

»

Победил наконец-то radeon KMS

Автор LinAdmin, дата создания 30 апреля, 2010 - 23:34.

Победил наконец-то radeon KMS + DRM, ускорение есть, даже работает более-менее прилично.
Сильно помогла статья: http://www.x.org/wiki/radeonBuildHowTo
Дабы больше никому не наступать на грабли сообщаю - модуль radeon должен быть загружен ДО иксов, а то не будет работать KMS и соответственно 3D ускорение.

Вопрос знающим людям.
При загрузке модуля radeon тут же вырубается монитор, пока не загрузятся иксы, потом монитор снова включается и я уже вижу kdm.
Как сделать так, чтобы этого не произходило. А то вдруг мне на терминал какое нибудь важное сообщение какой нибудь демон выдаст, а тут такой облом. :-\
Как победить?

—

Если ничего не помогает, прочти наконец инструкцию...

»

может добавить modprobe

Автор note173, дата создания 30 апреля, 2010 - 23:59.

может добавить modprobe radeon в скрипт запуска xdm?

»

для этого есть более

Автор eegorov, дата создания 1 мая, 2010 - 14:15.

для этого есть более подходящее место...
А вообще-то, имхо, проще в DRM в ядро вкомпилить...

»

В скрипт xdm? ИМХО кривоватое

Автор LinAdmin, дата создания 2 мая, 2010 - 23:58.

В скрипт xdm? ИМХО кривоватое решение.
DRM не вкомпилил в ядро по одной простой причине - это тестовая функция. Упадет drm или radeon, следом упадет ядро.
Поэтому хотелось бы более красивого решения...

—

Если ничего не помогает, прочти наконец инструкцию...

»

Посмотри dmesg, на что

Автор krigstask, дата создания 4 мая, 2010 - 11:28.

Посмотри dmesg, на что ругается. После запуска иксов в консоль можешь переключиться?

—

Текстовый редактор vi имеет два режима работы: в первом он пищит, а во втором — всё портит.

»

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".