wpa_supplicant

Не удается поднять вай-дзынь. RaLink rt3060.

dmesg|tail

[    5.107183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  127.193301] r8169 0000:02:00.0 eth0: link down
[  127.193311] r8169 0000:02:00.0 eth0: link down
[  127.193315] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  128.889614] r8169 0000:02:00.0 eth0: link up
[  128.889625] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  273.598183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  364.678185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  396.118183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  429.438183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 109.162.55.92  netmask 255.255.252.0  broadcast 109.162.55.255
        inet6 fe80::92e6:baff:fe53:3c8d  prefixlen 64  scopeid 0x20<link>
        ether 90:e6:ba:53:3c:8d  txqueuelen 1000  (Ethernet)
        RX packets 136  bytes 159207 (155.4 KiB)
        RX errors 0  dropped 104  overruns 0  frame 0
        TX packets 47  bytes 4354 (4.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 12  bytes 792 (792.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12  bytes 792 (792.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

sit0: flags=193<UP,RUNNING,NOARP>  mtu 1480
        inet6 ::127.0.0.1  prefixlen 96  scopeid 0x90<compat,host>
        sit  txqueuelen 0  (IPv6-in-IPv4)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 13  dropped 0 overruns 0  carrier 0  collisions 0

iwconfig все по нулям

less /etc/conf.d/net

# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.  To create a more complete configuration,
# please review /usr/share/doc/openrc*/net.example* and save your configuration
# in /etc/conf.d/net (this file :]!).
config_eth0="dhcp"

modules_wlan0=("wpa_supplicant")
config_wlan0=("dhcp")
wpa_supplicant_wlan0="-B -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf"
ctrl_interface=/var/run/wpa_supplicant
preup(){
	iwconfig wlan0 txpower on
	iwconfig wlan0 rate 45M
}

less /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=2
network={
	ssid="Farscape"
	psk="passkey"
}

На попытку:
wpa_supplicant -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf
ругается страшными словами вроде:

ioctl[SIOCSIWPMKSA]: Invalid argument 
ioctl[SIOCSIWMODE]: Invalid argument 
ioctl[SIOCGIWRANGE]: Invalid argument 
ioctl[SIOCGIWMODE]: Invalid argument 
ioctl[SIOCSIWAP]: Invalid argument 
и т.д. и т.п.
Trying to associate with SSID 'Farscape'
Association request to the driver failed
Authentication with 00:00:00:00:00:00 timed out.

В чем моя ошибка?